Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > Plastic Keg to MLT conversion - need suggestions
Reply
 
LinkBack Thread Tools
Old 04-30-2012, 07:43 PM   #1
LoneWolfPR
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Indianapolis, IN
Posts: 257
Liked 2 Times on 2 Posts
Likes Given: 6

Default Plastic Keg to MLT conversion - need suggestions

So I managed to get a plastic keg because it has a huge crack in the bottom. I'd like to convert it to an MLT. The crack isn't an issue because it's the part of the bottom I'd just cut out for an opening. The problem I have is that the opening at the top isn't the same size as a standard keg. The inside of the opening is the standard 2'', but the outside of the plastic is 2.5''. It also doesn't look like a tri clover clamp will work on it. I'm looking for any suggestions people might have of being able to hook up some sort of elbow to a ball-valve coming from the opening. Here are some pictures.

camerazoom-20120430153407586.jpg   camerazoom-20120430153433108.jpg  
__________________

In the Keg: Nothing Currently
In Secondary: Nothing Currently
In Bottles:Oblivion RIS, EdWort's Apfelwein
In Primary: Nothing Currently
On Deck: Nothing Currently
In Design: Saison de Erin

LoneWolfPR is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 07:52 PM   #2
Dan
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Dan's Avatar
Recipes 
 
Join Date: Oct 2010
Location: Makakilo, Hawaii
Posts: 6,239
Liked 1906 Times on 1181 Posts
Likes Given: 2742

Default

Any chance of getting a cheap/free coupler from the same place you got the keg? If so you could probably modify for your use.

__________________
Dan is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 07:58 PM   #3
LoneWolfPR
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Indianapolis, IN
Posts: 257
Liked 2 Times on 2 Posts
Likes Given: 6

Default

doubtful, but possibly. I'd need a stem assembly too though. Would I be able to take it apart, removing just the stem so that the coupler can still attach, but I can drain straight from the bottom?

__________________

In the Keg: Nothing Currently
In Secondary: Nothing Currently
In Bottles:Oblivion RIS, EdWort's Apfelwein
In Primary: Nothing Currently
On Deck: Nothing Currently
In Design: Saison de Erin

LoneWolfPR is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 09:16 PM   #4
Dan
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Dan's Avatar
Recipes 
 
Join Date: Oct 2010
Location: Makakilo, Hawaii
Posts: 6,239
Liked 1906 Times on 1181 Posts
Likes Given: 2742

Default

I would imagine you could adapt the coupler but honestly without seeing it hard to say for sure. If you can get a look at one you could probably decide. I especially wouldn't pay for one before I knew it could be modified.


As long as you have a false bottom installed I can't think of a reason why you wouldn't be able to drain directly below it, there would be no loss of wort from mash/lauter tun dead space!

__________________
Dan is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 09:21 PM   #5
fletchsj
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Beaverton, OR
Posts: 365
Liked 3 Times on 3 Posts
Likes Given: 2

Default

you could cut the bottom as planned, then get a tap and die set large enough to put threads inside your top opening. thread on a ball valve or whatever you plan to use. Insert false bottom and away you go :-)

__________________
fletchsj is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 09:33 PM   #6
LoneWolfPR
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Indianapolis, IN
Posts: 257
Liked 2 Times on 2 Posts
Likes Given: 6

Default

Well the top opening already has threads for the spear assembly. I think I'm going to see if they have an extra spear assembly. Looks like I could remove the spear itself leaving the top portion. Then I could just plug up the gas port on a standard sankey coupler.

The other option that's been mentioned to me is looking for some sort of rubber boot that I could hose clamp to the opening and an elbow then hook the valve to the elbow.

__________________

In the Keg: Nothing Currently
In Secondary: Nothing Currently
In Bottles:Oblivion RIS, EdWort's Apfelwein
In Primary: Nothing Currently
On Deck: Nothing Currently
In Design: Saison de Erin

LoneWolfPR is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 09:41 PM   #7
fletchsj
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Beaverton, OR
Posts: 365
Liked 3 Times on 3 Posts
Likes Given: 2

Default

if it is already threaded, then get a nipple and a reducer and attach a valve. Or get a 2" plug and install. then pop a hole in the side if that is what you want to do.

__________________
fletchsj is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 09:49 PM   #8
LoneWolfPR
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Indianapolis, IN
Posts: 257
Liked 2 Times on 2 Posts
Likes Given: 6

Default

oops, my mistake. I misunderstood how these things work. I guess it's not threaded.

__________________

In the Keg: Nothing Currently
In Secondary: Nothing Currently
In Bottles:Oblivion RIS, EdWort's Apfelwein
In Primary: Nothing Currently
On Deck: Nothing Currently
In Design: Saison de Erin

LoneWolfPR is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 11:27 PM   #9
JuanMoore
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
JuanMoore's Avatar
Recipes 
 
Join Date: Oct 2009
Location: The Old Pueblo
Posts: 16,389
Liked 3220 Times on 3123 Posts
Likes Given: 18

Default

With a little creativity and a few basic plumbing parts you can create a drain without the use of a tri-clamp.

http://www.homebrewtalk.com/f51/star...-herms-192608/

__________________
Keezer Soze

Yuri rubs it out with 60 grit... wouldn't even feel a tenga egg. -Randar

, place entry ox dixla to suck. Fcxk fwnpoo and passed. Hel an my spupid ass. OK. - TXCrash
JuanMoore is offline
 
Reply With Quote Quick reply to this message
Old 05-01-2012, 02:03 AM   #10
LoneWolfPR
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Indianapolis, IN
Posts: 257
Liked 2 Times on 2 Posts
Likes Given: 6

Default

How did you create a seal between the copper pipe and the side? Some sort of epoxy?

__________________

In the Keg: Nothing Currently
In Secondary: Nothing Currently
In Bottles:Oblivion RIS, EdWort's Apfelwein
In Primary: Nothing Currently
On Deck: Nothing Currently
In Design: Saison de Erin

LoneWolfPR is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Conversion? cino101 DIY Projects 2 10-06-2011 05:45 PM
Help me with this conversion bluemoose DIY Projects 2 07-06-2011 01:17 AM
My first Keg conversion avwfreak DIY Projects 4 02-19-2009 11:58 PM
my 1-to-3 tap conversion williec30 DIY Projects 55 01-21-2009 10:59 PM
10 gal conversion ? busmanray DIY Projects 2 06-19-2008 05:47 PM