New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > DIY Projects > Perlick Flow Control Issues... Help!




Reply
 
LinkBack Thread Tools Display Modes
Old 04-01-2013, 01:33 AM   #1
Dingobitme
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Denver, Colorado
Posts: 39
Liked 1 Times on 1 Posts

Default Perlick Flow Control Issues... Help!

Hope this is in the right spot... I am in the middle of a build and have a keg of Tank Seven all nice an happy at about 5 lbs with 6 feet of 3/16th and a picnic faucet... Pours great... I swapped it with a PFC faucet and now nothin but foam... I tried the adjuster lever in every possible position, then lowered the pressure, then raised it.. Still nothing but foam... Any suggestions?

BTW, I went with the PFCs because we are running them upstairs and wanted lots of flexibility with diff beers and pressures... A few folks suggested them.



__________________
Dingobitme is offline
 
Reply With Quote Quick reply to this message
Old 04-03-2013, 03:42 AM   #2
Dingobitme
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Denver, Colorado
Posts: 39
Liked 1 Times on 1 Posts

Default

Nothin?



__________________
Dingobitme is offline
 
Reply With Quote Quick reply to this message
Old 04-03-2013, 03:50 AM   #3
bsomogyi
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Erie, CO
Posts: 100
Liked 18 Times on 9 Posts
Likes Given: 1

Default

You mention you are running the taps upstairs - does that mean you have a long run from the kegerator? If so are the lines chilled? Biggest culprits of foam I've had in my system are due to pressure, temp, or length of the lines.

bsomogyi is offline
 
Reply With Quote Quick reply to this message
Old 04-03-2013, 04:00 AM   #4
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 8,395
Liked 811 Times on 673 Posts

Default

Yes, I think we're going to need a better description of exactly where those Perls are located (I refuse to use unsanctioned TLAs )

Cheers!

__________________
day_trippr is offline
 
Reply With Quote Quick reply to this message
Old 04-04-2013, 12:14 AM   #5
Dingobitme
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Denver, Colorado
Posts: 39
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by bsomogyi
You mention you are running the taps upstairs - does that mean you have a long run from the kegerator? If so are the lines chilled? Biggest culprits of foam I've had in my system are due to pressure, temp, or length of the lines.
Whoops... I guess I was nebulous....

I am in the middle of getting the upstairs taps installed, but currently pouring from the keezer in the basement from the aforementioned hose and picnic faucet (gotta reward myself for the small victories). I temporarily installed one of the Perlicks in the collar of my keezer in substitution of the picnic faucet and to try out the Perlick...I did not change a thing... Not pressure, length, or anything... Just pulled the plastic faucet off the hose and plugged it into the Perlick mounted on the collar... Like I said... It was great, and now its foamy...

I also tried pulling the little restriction adjuster out of the Perlick and there is no difference... Still foamy... Weird...
__________________
Dingobitme is offline
 
Reply With Quote Quick reply to this message
Old 04-04-2013, 12:15 AM   #6
Dingobitme
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Denver, Colorado
Posts: 39
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by day_trippr
Yes, I think we're going to need a better description of exactly where those Perls are located (I refuse to use unsanctioned TLAs )

Cheers!
I need to see a list of the sanctioned TLAs....

I will consider myself warned...
__________________
Dingobitme is offline
 
Reply With Quote Quick reply to this message
Old 04-04-2013, 02:51 PM   #7
nealperkins
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
nealperkins's Avatar
Recipes 
 
Join Date: Oct 2007
Location: Boone, NC
Posts: 271
Liked 11 Times on 9 Posts
Likes Given: 5

Default

That's totally weird. The tap will foam a bit until chilled. You can pour 3 or 4 ounces, pause and pour the rest. Still the second beer will be better. But, I doubt that this is the culprit.

I would inspect the inside of the faucet, maybe disassemble it. (It's not that hard.) However, for sure I would call customer service, they are very helpful folks.

When you find out, tell us what it was.

__________________
nealperkins is offline
 
Reply With Quote Quick reply to this message
Old 04-04-2013, 03:04 PM   #8
stratslinger
Brewing Thespian
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
stratslinger's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Terryville, CT
Posts: 1,800
Liked 101 Times on 88 Posts
Likes Given: 76

Default

The "little restriction adjuster"?? Which exact model of Perlick are you using? Also, what temperature is your keezer being kept at?

Typically, I'll keep my kegerator around 40F. I have 8ft 3/16" diameter lines, and keep the regulator dialed in at 11psi. My first pour sometimes comes out a little more heady than the rest, but not extremely so (I think if I went to 9ft or 10ft lines, that'd solve my problem). The pressure you're describing will, given time, cause your keg to go flat - but if you cranked it up to the 10 or 11psi that would be more appropriate without going to longer lines, you'd guarantee yourself foamy pours every time.

__________________
stratslinger is offline
 
Reply With Quote Quick reply to this message
Old 04-04-2013, 03:08 PM   #9
chrisdb
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: philadelphia, pa
Posts: 212
Liked 5 Times on 5 Posts
Likes Given: 4

Default

are your beer lines clear tubing?
I had a foaming issue on a perlick tap on my kegerator. I checked out the tubing on the backside and could see it sucking air (little bubbles backflowing from the tap). Turns out the worm clamp had stripped and the tubing wasn't sealing completely.
not to say that's your problem, but a good hard look at your beer line from behind the tap couldn't hurt.

__________________
chrisdb is offline
 
Reply With Quote Quick reply to this message
Old 04-05-2013, 07:06 PM   #10
Dingobitme
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Denver, Colorado
Posts: 39
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by stratslinger View Post
The "little restriction adjuster"?? Which exact model of Perlick are you using? Also, what temperature is your keezer being kept at?

Typically, I'll keep my kegerator around 40F. I have 8ft 3/16" diameter lines, and keep the regulator dialed in at 11psi. My first pour sometimes comes out a little more heady than the rest, but not extremely so (I think if I went to 9ft or 10ft lines, that'd solve my problem). The pressure you're describing will, given time, cause your keg to go flat - but if you cranked it up to the 10 or 11psi that would be more appropriate without going to longer lines, you'd guarantee yourself foamy pours every time.
Its the 545PC, the one with the adjustable flow restriction... it looks like a globe valve cage if you are familiar with those...

Good point on the lower pressure... Of course... the keg is aready gone! I did not have it around long enough to get flat at 5 psi.

I am keeping it around 43-45... the basement is 55 now, so the maximum temp diff between the keg and faucet is 10-12 deg... The faucet is of course mounted in the collar and the shank is cooler than that...


__________________
Dingobitme is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Perlick flow control? JONNYROTTEN Bottling/Kegging 18 03-09-2014 04:29 AM
Perlick 545 PC with Flow control Steelers77 Sponsor Showcase 33 09-03-2013 02:16 PM
For Sale: Perlick Flow Control Faucet a100700 For Sale 7 01-30-2013 01:50 AM
Perlick Flow Control Faucet a100700 For Sale 6 01-29-2013 09:08 PM
WTB (Want To Buy) - Looking for new perlick faucets with or without flow control. indibrewer For Sale 6 08-21-2012 01:11 PM