New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > DIY Projects > Need Some Expert Help For A DIY Dummy




Reply
 
LinkBack Thread Tools Display Modes
Old 06-18-2009, 01:04 AM   #1
MerryMonk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: South Carolina
Posts: 20
Default Need Some Expert Help For A DIY Dummy

I have been brewing extract kits for a couple years now, and I really would like to step it up to the next level and begin brewing AG beers. I have scoured this site as well as youtube for explanations on building a homemade mash tun. However, not being naturally handy in the DIY department, all of the stuff i have seen does not seem to have enough step by step pics or detailed info that i need to complete the project myself. Does anyone out there know of a site or thread that would take me step by step with pics and show me exactly how to build a mash tun? Any and all help on this would be greatly appreciated. Thank you ahead of time for your answers!!!!



__________________
MerryMonk is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2009, 01:16 AM   #2
Hammy71
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Hammy71's Avatar
Recipes 
 
Join Date: Sep 2008
Location: , Maryland, The Tax Me State
Posts: 5,481
Liked 376 Times on 296 Posts
Likes Given: 535

Default

http://www.homebrewtalk.com/f51/cheap-easy-10-gallon-rubbermaid-mlt-conversion-23008/


__________________
Hammy71 is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2009, 01:21 AM   #3
Rick500
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: KY
Posts: 2,617
Liked 9 Times on 7 Posts
Likes Given: 1

Default

That thread pretty much lays it all out. I was able to build one following it.

__________________
Rick500 is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2009, 01:32 AM   #4
MerryMonk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: South Carolina
Posts: 20
Default

Thanks for the perfect answer to my dilemma. i think even i can follow that method. Just one more question....would this setup work for say a 70 qt cooler as well? Want to make sure i have the capacity to brew higher gravity stuff. Thank you kindly for your help.

__________________
MerryMonk is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2009, 02:15 AM   #5
Duckfoot
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Dürty Soüth, GA
Posts: 1,375
Liked 5 Times on 5 Posts

Default

I am using a 70qt Coleman Extreme as an MLT....

Here is the manifold for it...

__________________

On deck : DFB Triple Black Death By Chocolate Stout
Primary: Notta...
Secondary: 21 Year Mead...
Kegged : DFB Belgian Pale, DFB Brown, DFB Belgian Dark Strong, DFB Cider...
------------------------------------------------------

Quote:
Originally Posted by Timberwolf View Post
Non-Alcoholic beer is like going down on your cousin, it might taste the same but it just ain’t right!
Duckfoot is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2009, 02:37 AM   #6
mrk305
Beer Dude in the Sunset
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mrk305's Avatar
Recipes 
 
Join Date: May 2007
Location: Georgia
Posts: 1,717
Liked 11 Times on 11 Posts
Likes Given: 22

Default

My drain hole in my coleman cooler is 1/2" I.D. I got some 1/2" O.D. hose and stuffed it through the hole. Inside the cooler I have a 3/8 double ended push to fit barb fitting with a braided toilet hose clamped onto it. Inside the cooler, when I insert the barbed fitting inside the hose and pull it towards the outside, it is snug and water proof.

I have one of those big black paper clip things clamped onto the hose and I hang it on the cooler handle. That is "off". Unclip it and put it in the bucket is "on". It works great!

I bought the braided toilet fill hose, some 1/2 O.D. tubing and the double ended hose barb. Maybe I spend ten bucks. Beat that, McGiver!

__________________
Carport Brewery, Lilburn GA

Any advise offered after 10:00p.m. should be regarded as questionable
I can't brew until something is empty
mrk305 is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2009, 02:49 AM   #7
wilserbrewer
Vendor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 7 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 6,216
Liked 333 Times on 285 Posts
Likes Given: 7

Default

/\ /\ /\ /\ /\ /\ +1

extremely simple to just push a piece of tubing through the cooler drian and attach a braid w/ a plastic zip tie. Just clamp the tube above mash level and lower to drain.

tubing through drainhole here....
Cheap and Easy Mash Tun

clamps in lieu of valve here
Simple All Grain Brewing - German Pilsner

__________________
wilserbrewer
BIAB Bags, Hop Bags and Ratchet Pulleys for sale

Expert tailor and supplier of custom sized, top quality BIAB bags, hop bags and ratchet pulleys at reasonable pricing

http://biabbags.webs.com/


CORONA MILL BUCKET SYSTEM V. 2.0
wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2009, 01:44 AM   #8
MerryMonk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: South Carolina
Posts: 20
Default

I wanted to say a sincere thank you to all who replied to my post. Thanks for all the great tips and advice. i think i will definitely be able to build my MLT this weekend after a quick trip to home depot. Now.....everyone keep your fingers crossed that my first AG beer turns out great.

__________________
MerryMonk is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2009, 01:48 AM   #9
McKBrew
Feedback Score: 0 reviews
 
McKBrew's Avatar
Recipes 
 
Join Date: Oct 2006
Location: Silverdale, Washington
Posts: 8,292
Liked 29 Times on 26 Posts
Likes Given: 8

Default

Quote:
Originally Posted by MerryMonk View Post
I wanted to say a sincere thank you to all who replied to my post. Thanks for all the great tips and advice. i think i will definitely be able to build my MLT this weekend after a quick trip to home depot. Now.....everyone keep your fingers crossed that my first AG beer turns out great.
Good luck. You'll do fine. If you haven't seen it already, I recommend this link as another good AG primer. All Grain


__________________
McKBrew is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building a dummy-proof grain mill (pictures) ajfabb DIY Projects 19 09-15-2009 10:15 AM
Dummy Operator - 3 Piece Air Lock Mistake sharp63 Beginners Beer Brewing Forum 4 08-25-2009 01:39 AM
Belgian Wit = Wit Bier? I'm a dummy newb. bmckee56 Recipes/Ingredients 8 08-21-2009 05:30 PM
PID help for an electronics dummy alemonkey Equipment/Sanitation 10 10-22-2006 03:43 PM
I'm a dummy, did I ruin this? AleJoe General Techniques 5 03-18-2006 04:47 PM