Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > My RIMS/HERM design

Reply
 
LinkBack Thread Tools
Old 02-13-2008, 12:02 AM   #1
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,461
Liked 115 Times on 100 Posts
Likes Given: 11

Default My RIMS/HERM design

So as of this morning I thought I had my plans all figured out. Then I read the steam mash threads and might be changing gears. Anyway, please check out my system and give me some critiques.

Thanks

[YOUTUBE=_xQUOhzv_zM]Bourderij Kabouter RIMS/HERMS Brewery[/YOUTUBE]

Basically, I like the look of wood and this will match my future brewery room in my basement. I want direct fire capability and controls neatly organized. The HLT will be electric and temp controlled with a Ranco (on left of control panel). The MLT will be either RIMS or HERMS depending on where the flexible hoses (not shown) are routed. The ball valve on the control panel restricts the pump and a QD is just above the ball valve so I can change hoses there. The two circles on the control panel are manual controls for the burners.

Like I said, I may be reconsidering this in favor of a steam system. But after the design of this one I wanted to see what people thought.

Cheers


Last edited by Boerderij_Kabouter; 02-13-2008 at 12:13 AM.
Boerderij_Kabouter is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2008, 12:06 AM   #2
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,461
Liked 115 Times on 100 Posts
Likes Given: 11

Default

hmmmm. can't get the video to load. Any tips

Thanks, Now its working


Last edited by Boerderij_Kabouter; 02-13-2008 at 12:14 AM.
Boerderij_Kabouter is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2008, 12:12 AM   #3
SuperiorBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2007
Location: Ashland, WI
Posts: 1,693
Liked 25 Times on 16 Posts
Likes Given: 2

Default

Quote:
Originally Posted by Boerderij Kabouter
hmmmm. can't get the video to load. Any tips
Just paste the link in, otherwise you just want the part after the =
__________________
Rich

Last edited by SuperiorBrew; 02-14-2008 at 07:17 PM.
SuperiorBrew is offline
 
Reply With Quote Quick reply to this message
Old 02-14-2008, 06:41 PM   #4
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,461
Liked 115 Times on 100 Posts
Likes Given: 11

Default

So does everyone think this system will work?

I was not sure about the gas line routing... is it dangerous to have a few feet of gas line after the adjustment valve?

Also, this design has about 5 feet of copper tubing at the pump outlet before the valve that it up on my control panel. Those of you with experience, will this make priming my pump difficult? I am figuring that the air will still have a vertical escape path and should be able to purge out of the line but it is not tested.

Any critiques would be good as I am hoping to start collecting my parts within the next month. Please point something out if you see a potential problem.

Thanks

Boerderij_Kabouter is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brew Tree vs RIMS vs HERM UselessBrewing Equipment/Sanitation 19 06-06-2012 03:48 PM
Question for all you HERM/RIMS recirculators :) ! flananuts Equipment/Sanitation 5 11-03-2009 05:15 PM
HERM Heat exchanger ideas pickles DIY Projects 9 08-05-2009 03:12 PM
RIMS Controller design questions N5629 Equipment/Sanitation 2 11-24-2008 12:33 PM
Working on RIMS Design Mirilis Equipment/Sanitation 1 02-20-2008 12:47 AM