Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   My Modest Basement Pub. (http://www.homebrewtalk.com/f51/my-modest-basement-pub-320713/)

barneygumble 04-12-2012 08:08 PM

My Modest Basement Pub.
 
I cant compete with rvklein, but here it is. All built from scratch by yours truly from a semi unfinished space. Total cost of initial build was @$5k. Bar itself cost about $2k. Since these pics were taken, I've moved my taps up to a tower, installed a bar sink and drip tray draining to it, and lit the thing. I had a Pats Flying Elvis and edging etched into the mirror, and I purchased a new sofa. These pics were immediately after the build, so some of this stuff was still waiting to happen at the time.

barneygumble 04-12-2012 08:10 PM

1 Attachment(s)
.

barneygumble 04-12-2012 08:12 PM

2 Attachment(s)
,

PVH 04-12-2012 08:12 PM

A stripper pole is a good idea, but wood may not be the best material for long term use.

barneygumble 04-12-2012 08:13 PM

2 Attachment(s)
..

barneygumble 04-12-2012 08:14 PM

1 Attachment(s)
,,

Gregscsu 04-12-2012 08:15 PM

Quote:

Originally Posted by PVH (Post 3988061)
A stripper pole is a good idea, but wood may not be the best material for long term use.

+1

There are some places you really don't want to get a sliver.

barneygumble 04-12-2012 08:16 PM

Quote:

Originally Posted by PVH (Post 3988061)
A stripper pole is a good idea, but wood may not be the best material for long term use.

Right?:D

I covered the support column with a wrap instead of building it in.

Like I said, it is what it is, but I like it and it was in my budget.

Srceenplay 04-12-2012 08:16 PM

Looks good!!

Did it cost must to have the mirror etched? How did you find a place to do it? I would like to do that on my bar build but need to get my logo done.

barneygumble 04-12-2012 08:21 PM

Quote:

Originally Posted by Srceenplay (Post 3988076)
Looks good!!

Did it cost must to have the mirror etched? How did you find a place to do it? I would like to do that on my bar build but need to get my logo done.

It wasn't cheap. But not bad considering what I've heard elsewhere. Took it to a local glass shop. Just over $200 for the etching. I think they sent it out.


All times are GMT. The time now is 01:42 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.