Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > My DIY, low-budget, concrete-roller grain mill

Reply
 
LinkBack Thread Tools
Old 05-15-2009, 04:59 PM   #1
-TH-
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Zeeland, Michigan
Posts: 969
Liked 57 Times on 33 Posts
Likes Given: 2

Default My DIY, low-budget, concrete-roller grain mill

First off I have to say I'm pretty fortunate to have access to a lot of scrap parts, metal, and stuff where I work. If I see something "valuable" like a gear-motor for instance in good shape on its way to the dumpster, I'll grab it and throw it in my cabinet. Also we have drawers full of things like bushings, hardware, belts & pulleys, etc. Ok you get the idea, now on to the project....

I had been wanting to build a grain mill for quite some time. I probably spent more time thinking about this project then actually working on it (can you tell I'm an engineer?). I have access to our machine shop after hours which has a lathe but I couldn't get my hands on some nice round metal bars for the rollers so I thought I'd give concrete a try. Making the rollers was tricky, because I needed to find somthing to use for a mold that would hold the axles perfectly centered, but yet be removeable once the concrete cured. After one failed attempt using empty shortening containers (rollers were out of round because the axles weren't centered well), I used two quart-sized paint cans - the kind made from plasic with only the top being metal. The tricky part was making sure the holes in top and bottom of the can were perfectly centered. I actually put the cans in a lathe to spin them and then mark them with a marker. I punched out the holes with 1/2" hollow drill bit normally used for drilling paper. The axles are 1/2" dia. steel cut to length and a roll pin pressed into them (after being drilled) to make sure they don't spin inside the concrete. The rollers ended up being about 4-1/4" in diameter.



With the axles in place I filled the cans with concrete, vibrated the heck out of them with a palm sander to get the air bubbles out (otherwise the roller surfaces would be very pitted), and pounded the covers on. BTW I used a topping mix which contains little or no aggregate, I added a little more portland cement, and also acrylic fortifier. I have a book on concrete countertops that helped me with that somewhat. I think the concrete ingredients were the only things I had to buy for this project.



I used some self-aligning bronze bushings which work nice in sheet metal and won't bind up if things aren't perfectly aligned. You can see from then next picture how I made the gap adjustable.



I discovered along the way that I needed something to keep the grain from falling past the ends of the rollers since they can't be mounted up nice and tight to the side frames. Therefore I made some pieces out of UHMW plastic to prevent that.



The gearmotor was one I've had in my cabinet for years just waiting for the opportunity to be used. Its 67 RPM. I wish it had a little more torque but oh well.



The hopper was a reflector left over from our factory lighting retrofit. We installed flourescent a couple months ago and threw the HID's out. This reflector was never used, it was a spare.





I thought 67 RPM would be slow enough as is but I found I needed to gear it down even more to gain me some more power. I also had to add an idler bearing to keep the timing belt from hopping on the motor pulley. It really takes alot of power to crush the grain. I had a small hand crank on for testing purposes once and I was able to turn it only if I did just a little grain at a time.



And the crush...



Let me know what you think, I'd love to hear your comments!!!

EDIT: Here's a video of it in action:


Last edited by -TH-; 09-01-2009 at 01:52 AM.
-TH- is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 05:02 PM   #2
spitfire
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Bloomsburg, PA
Posts: 232
Liked 1 Times on 1 Posts

Default

Nice build. I love seeing stuff like this.

__________________
spitfire is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 05:04 PM   #3
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,804
Liked 2711 Times on 1629 Posts
Likes Given: 3484

Default

Except for the spelling error on this poster, it sums up my feelings about your project, good sir.



__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 05:25 PM   #4
JPicasso
Hackbrewer extraordinaire
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
JPicasso's Avatar
Recipes 
 
Join Date: Mar 2007
Location: Arlington Heights, IL
Posts: 418
Liked 4 Times on 3 Posts

Default

Whose Awesome?
Your Awesome.

And I bet you have more awesome's. Show us, please!
Nice work.

__________________

Brew On

JPicasso is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 05:37 PM   #5
samc
Feedback Score: 1 reviews
Recipes 
 
Join Date: Aug 2008
Location: Portland OR
Posts: 5,420
Liked 53 Times on 50 Posts
Likes Given: 29

Default

Cool - I would call it the Jimmy Hoffa Crusher! (buried in concrete)

__________________
samc is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 05:48 PM   #6
lehr
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: flushing michigan
Posts: 805
Liked 16 Times on 16 Posts

Default

That's coooolllllll !

__________________
lehr is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 06:06 PM   #7
Damonic
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Chicagoland
Posts: 441
Liked 2 Times on 2 Posts

Default

Love the ingenuity. Well done!

__________________
Damonic is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 06:54 PM   #8
wilserbrewer
Vendor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 9 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 6,579
Liked 396 Times on 338 Posts
Likes Given: 8

Default

Wow, your workmanship and design is top notch! Crush looks good as well.

__________________
wilserbrewer
BIAB Bags, Hop Bags and Ratchet Pulleys for sale

Expert tailor and supplier of custom sized, top quality BIAB bags, hop bags and ratchet pulleys at reasonable pricing

http://biabbags.webs.com



CORONA MILL BUCKET SYSTEM V. 2.0
wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 06:55 PM   #9
Araxi
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Winnipeg, Manitoba, CA
Posts: 71
Default

Very cool,good job.

__________________
Araxi is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2009, 06:58 PM   #10
Munsoned
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: DC Metro
Posts: 642
Liked 1 Times on 1 Posts

Default

Jesus, that's a beautiful thing...

__________________

___________________________
“While the rest of the species is descended from apes, redheads are descended from cats.” - Mark Twain

Munsoned is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grain mill roller diameter? fifelee DIY Projects 9 12-16-2009 02:58 AM
For Sale - WTB Roller Grain Mill Brewme For Sale 4 12-06-2009 11:25 PM
2 or 3 roller mill? IwanaBrich Equipment/Sanitation 3 03-02-2009 02:20 PM
Thoughts...2 or 3 roller grain mill??? IwanaBrich Equipment/Sanitation 12 02-23-2009 04:09 PM
Which roller mill ? How long can I store crushed grain ? brewman ! Equipment/Sanitation 6 02-05-2008 06:35 PM