Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   My brewstand build (http://www.homebrewtalk.com/f51/my-brewstand-build-285175/)

Chrisl77 12-04-2011 10:25 PM

My brewstand build
So I got inspired and decided to build A permanent brew rig instead of turkey fryers. I wanted to build a 2 tier with both burners up high and only have to use one pump. This is what I came up with so far.


The HLT will sit on the left burner and the BK will sit on the right burner with my 48 qt. mash tun in the middle. The plan is to gravity feed the hot water into the mash tun then use a pump to transfer the wort from the mashtun to the BK and recirculate through my chiller at the end.

Here is a close up of the one burner mount I have done so far. I still need to make the heat shield.

OneHoppyGuy 12-05-2011 12:21 AM

Very nice, may I suggest not using a c-clamp, it may interfere with the kettle :tank:

Chrisl77 12-05-2011 12:24 AM

Lol ya that was my extension of the ground clamp for my welder I ran out of places i could get it clamped on.

OneHoppyGuy 12-05-2011 12:38 AM

Black Diamond Rampage IPA inspired comment

mdgagne 12-05-2011 12:50 AM

what's with the WM ad? Seriously though nice build.

day_trippr 12-05-2011 12:52 AM


Originally Posted by mdgagne (Post 3541941)
what's with the WM ad?[...]

Show some respect. That's Jimmy Hoffa's crypt...

Cheers! ;)

OneHoppyGuy 12-05-2011 01:14 AM


Originally Posted by day_trippr (Post 3541944)
show some respect. That's jimmy hoffa's crypt...

Cheers! ;)


Chrisl77 12-05-2011 01:25 AM

The add is the parking spot for the garbage can. Maybe i should have turned it the other way. Anyways cant wait to get this built so i can brew some with it.

Junkster 12-06-2011 01:05 AM

Homebrew is also part of my "Waist Management" ! <G>

Chrisl77 12-06-2011 01:37 AM

Its primed and painted will get some more pics when i finish the gas manifold.

All times are GMT. The time now is 04:40 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.