Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > My aquarium temperature controller build
LinkBack Thread Tools
Old 02-27-2011, 04:25 PM   #1
Feedback Score: 1 reviews
Misplaced_Canuck's Avatar
Join Date: Jan 2011
Location: NE Columbia SC - Formerly, Montreal Canada
Posts: 2,752
Liked 132 Times on 107 Posts
Likes Given: 41

Default My aquarium temperature controller build

I finally got around to building my temperature controller.

I used an electrical box from Home Depot (around 6x6x6"), a regular two-way switch (I want to be able to shut it all off completely, but it's not necessary), and a normal 3 prong outlet.

I used a drill bit to make holes in the corners on my template to make room for the controller, the switch, and the outlet, which I then connected with a jig saw, and finally finished the holes using a dremel with a mini drum sander. It would be easier/quicker to use the cutting tool for the dremel, but I didn't have one so I used what was available.

Here's what it ended up looking like:

I ended up mounting the outlet on the back on the thing, it could just as easily be mounted on the sides or under.


Originally Posted by Misplaced_Canuck
Carbonic bite? Is that like the bubonic plague?
Originally Posted by ebstauffer
Needless to say after more than a few drams my mental efficiency matched my mashing efficiency.
Misplaced_Canuck is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
ebay aquarium temp controller build android DIY Projects 4102 09-20-2014 08:26 PM
Wrong **** voltage aquarium temperature controller -> Pay if forward ThreeDogsNE DIY Projects 6 07-25-2011 11:25 PM
Fermentation Temperature controller build Hbrew DIY Projects 3 01-03-2011 03:51 PM
Aquarium RIMS Controller? Am I On Crack? jasonsbeer DIY Projects 7 09-24-2010 07:48 PM
Fermentation freezer with aquarium controller. Paramecium DIY Projects 5 08-17-2010 03:23 PM