The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > DIY Projects > MLT build - a cooler with a big hole

Reply
 
LinkBack Thread Tools
Old 10-10-2012, 02:38 AM   #1
bredstein
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Everett, MA
Posts: 135
Liked 3 Times on 3 Posts
Likes Given: 7

Default MLT build - a cooler with a big hole

After about 15 batches I started thinking about all grain. I had a 5 gallon cooler with a plastic spigot, which I used for mini-mashes (malt was in a bag and I never had more than 3 lbs of it). Now I wanted to add a ball valve and a copper manifold, but for some reason the hole was too big - about 1". I looked at some bulkheads, and they all were 1/2". Then I asked for advice at bargainfittings.com, and its owner Wayne suggested to use a 3/4"x1/2" NPT SS bushing. It worked for me with a few minor modifications, so if somebody runs into a similar problem, here is a possible solution. This is how it looks.

I added a washer which I found at HD in the electric section, it is quite thin, called 3/4"x1", and I guess is used for some rigid pipes. The washer went outside. The bushing is a little bit too short, and the lock nut is somewhat too thick - after I tightened it, there was only about 1/16 of thread left. So I had to grind the nut slightly, which allowed me to add a 3/4x1/2 adapter. Tested with water, no leaks. I started cutting slits in the manifold, hopefully will make my first AG brew this coming weekend...

img_0360.jpg   img_0353.jpg   img_0362.jpg  
__________________
bredstein is offline
jestmaty Likes This 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to: Build The BEST Mash Tun from a Beverage Cooler crazyworld DIY Projects 47 05-06-2014 11:18 PM
Hole too big? - Coleman 70qt extreme cooler mash tun ewibolo DIY Projects 3 09-28-2012 07:18 PM
Ice Cream Cooler Conversion....to build or not to build. natebomb DIY Projects 7 10-16-2011 06:54 PM
My Draft Cooler Build FooFan DIY Projects 5 07-04-2011 09:12 PM
My Keggle/Cooler Rig Build culaslucas DIY Projects 6 10-23-2008 02:46 PM