Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > mcmaster through-wall/bulkhead tank fittings

Reply
 
LinkBack Thread Tools
Old 09-29-2009, 04:52 PM   #11
nostalgia
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Port Murray, NJ
Posts: 2,397
Liked 58 Times on 42 Posts
Likes Given: 8

Default

Quote:
Originally Posted by passedpawn View Post
DAMMIT. I just got done drilling my keggles with the poseur nipple bulkheads.

BTW, the website says "Requires drilling a 1.062 hole for proper installation". How did you do this?
I used a 1 1/16" bit, which is 1.0625.

-Joe
__________________
Man Skirt Brewing Co. Website Beer related hints, tips, calculators, links and other good stuff.
MSB Facebook Page Find out what I'm brewing or building! Project Benderator is in full swing.
Fisher Woodcraft wood turning
nostalgia is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 05:37 PM   #12
JBStith
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Greensboro, NC
Posts: 45
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by nostalgia View Post
I went with one of these from HomebrewHeaven for my mash tun - $30 in stainless, $10 in brass. Much better than those pipe nipple fake bulkhead fittings.







-Joe
Isn't this just a stainless bushing and lock nut?
http://www.mcmaster.com/#4452k171/=3uedbj
http://www.mcmaster.com/#4452k675/=3uedl9

Cheers,
Brian
__________________

Cheers,
Brian

JBStith is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 05:38 PM   #13
nostalgia
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Port Murray, NJ
Posts: 2,397
Liked 58 Times on 42 Posts
Likes Given: 8

Default

It's very similar, but two big differences: the bulkhead is a straight thread on the outside, not a tapered thread like a bushing. The bulkhead also has a machined face on the nut part for the sealing washer to bear on.

-Joe

__________________
Man Skirt Brewing Co. Website Beer related hints, tips, calculators, links and other good stuff.
MSB Facebook Page Find out what I'm brewing or building! Project Benderator is in full swing.
Fisher Woodcraft wood turning
nostalgia is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 05:49 PM   #14
Irrenarzt
HNIC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 2 reviews
 
Irrenarzt's Avatar
Recipes 
 
Join Date: Aug 2009
Location: Half a mile from Tucson
Posts: 1,898
Liked 154 Times on 113 Posts
Likes Given: 91

Default

Swagelok FTMFW

__________________
Irrenarzt is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 05:50 PM   #15
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 21,895
Liked 937 Times on 623 Posts
Likes Given: 28

Default

It's the latter feature that really matters most. Locknuts are usually over tapped so that it can spin all the way down on a typical tapered thread so that's no problem. It's just that the flat/hex diameter is usually no larger than the threads so there is no sealing surface. You can make one if you have the cajones to silver solder a flat washer against the hex.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 06:33 PM   #16
arturo7
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
arturo7's Avatar
Recipes 
 
Join Date: Apr 2007
Location: Huntington Beach
Posts: 9,029
Liked 142 Times on 112 Posts
Likes Given: 1

Default

This thread couldn't come at a better time!


Pardon me if this is a stupid question:

The description for the Swagelok fitting lists the connections as male NPT and tube fitting. I've got a handle on NPT but what is the tube fitting?

thanks

__________________

Hey, knock that shvt off. We're drinkin' here.

arturo7 is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 06:36 PM   #17
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,461
Liked 116 Times on 101 Posts
Likes Given: 11

Default

tube fitting is a compression fitting. The number I listed above will fit a 3/4" OD tube.

__________________
2P-Twent-E Simple Brew DITCHES 1 DITCHES 2 Fermentolagertaporator side-by-side ferm Twelve Hopostles Labels
Boerderij_Kabouter is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 06:51 PM   #18
arturo7
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
arturo7's Avatar
Recipes 
 
Join Date: Apr 2007
Location: Huntington Beach
Posts: 9,029
Liked 142 Times on 112 Posts
Likes Given: 1

Default

bedankt!

..

__________________

Hey, knock that shvt off. We're drinkin' here.

arturo7 is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2009, 07:01 PM   #19
paledragon
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Bridgewater, MA
Posts: 156
Default

what initially caught my eye was the low profile and unthreaded CPVC through-wall fittings. for version 2, i'm contemplating:

- moving to a 2-3kW low density element rims system
- ditching the coolers, and moving to stainless HLT and MLT
- installing bottom drains on the HLT and MLT for complete draining
- adding some hard piping (probably CPVC)

my system works great for the actual brewing, but setup and cleaning leaves a lot to be desired. i want to line the MLT with something along the lines of the brew-in-a-bag system (while still keeping a manifold/false bottom) so when i'm done, i can just lift the spent grains out. having a bottom drain means i can just hose the interior without ever having to remove the MLT for cleaning.

p.d.

__________________

keg 1: 3 hearted ale
keg 2: british strong ale
keg 3: munich helles
keg 4: empty

on deck: more IPA.

paledragon is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2011, 02:11 PM   #20
erniew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Saint Louis, MO
Posts: 6
Default Solderless bulkhead fitting

I am getting ready to install a solderless bulkhead fitting in my brew kettle. How high above the bottom of the kettle should I make my hole for the fitting?

__________________
erniew is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keg/Tun Bulkhead Fittings MattieSy Equipment/Sanitation 12 12-31-2010 06:45 AM
show me your homemade bulkhead fittings! Huizer DIY Projects 9 10-13-2009 07:04 PM
Bargain Fittings Bulkhead Attachments? Gremlyn Equipment/Sanitation 2 07-06-2009 07:35 PM
Are Buna o rings ok for bulkhead fittings? bscriver Equipment/Sanitation 1 01-14-2009 01:23 AM
Tailpiece fittings on McMaster? MadDwarf DIY Projects 3 09-16-2008 05:24 AM