Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > Keggle Quick Connects?
Reply
 
LinkBack Thread Tools
Old 03-08-2009, 06:57 PM   #1
Denny's Evil Concoctions
Grande Megalomaniac
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Denny's Evil Concoctions's Avatar
Recipes 
 
Join Date: Oct 2005
Location: West Kelowna BC, Canada
Posts: 7,767
Liked 51 Times on 42 Posts

Default Keggle Quick Connects?

Modifying my 3 tier into a direct fired RIMS so I am adding quick release connections.

Trying to figure out the most cost effective way of doing this. Currently looking at metal garden house quick releases but you have to add fittings to adapt the hose thread to 1/2" NPT. So the costs spikes.

Any other options? And are you guys putting the quick release nipple on your keggle side connection or on the hoses?

Looked into using cam lock connections but I couldn't find any under 3/4" and they are bit pricey.

__________________

I may not be an expert, but I did stay at a Holiday Inn Express........ 6 months ago.

http://www.homebrewtalk.com/f39/dennys-quick-dirty-faq-153729/#post1766281

http://groups.homebrewtalk.com/Taproom_Facebook_Repository

Denny's Evil Concoctions is offline
 
Reply With Quote Quick reply to this message
Old 03-08-2009, 08:27 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,009
Liked 970 Times on 649 Posts
Likes Given: 28

Default

McMaster Carr. Search for items 6739K59 and 6739K68. About $10 a set, male npt goes in your vessel valves, the other part goes on your hoses.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 03-08-2009, 09:33 PM   #3
wardenwheat
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: SE Iowa
Posts: 116
Liked 3 Times on 3 Posts

Default Sanitary Quick connects

St. Pats in Texas makes a 1/2 inch male pipe thread sanitary disconnect. If you already have a 1/2 inch coupling in you keg you could add these. I think they are $16 a piece. Not super cheap, but I have a few of these and they are very strong and very easy to use.

__________________
wardenwheat is offline
 
Reply With Quote Quick reply to this message
Old 03-09-2009, 12:03 AM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,009
Liked 970 Times on 649 Posts
Likes Given: 28

Default

1. It doesn't have to be sanitary.
2. triclovers are neat but it's a two handed operation and not all that quick.
3. I'd rather chop my wang off than to give St. Pat's business.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 03-09-2009, 01:57 AM   #5
Couevas
Feedback Score: 0 reviews
 
Couevas's Avatar
Recipes 
 
Join Date: Mar 2008
Location: Seattle, WA
Posts: 480
Liked 2 Times on 2 Posts

Default

I cannot preach enough about the brass jobs I got from McMaster. I posted specs and pics here(post 17), I think....

__________________
Crooked Horn Brewing Co.
BREWtality 2 Build Thread
"Always remember that I have taken more out of alcohol than alcohol has taken out of me."
"No soldier can fight unless he is properly fed on beef and beer."
"Make sure that the beer - four pints a week - goes to the troops under fire before any of the parties in the rear get a drop."
-Winston Churchill----brilliant man
Couevas is offline
 
Reply With Quote Quick reply to this message
Old 03-09-2009, 02:55 AM   #6
Denny's Evil Concoctions
Grande Megalomaniac
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Denny's Evil Concoctions's Avatar
Recipes 
 
Join Date: Oct 2005
Location: West Kelowna BC, Canada
Posts: 7,767
Liked 51 Times on 42 Posts

Default

Found the connectors they use for power washers but since the largest this store carried was 3/8", I went with 3/4 in Cam Lock connectors with some step down adapters instead.

Poly version of these:

__________________

I may not be an expert, but I did stay at a Holiday Inn Express........ 6 months ago.

http://www.homebrewtalk.com/f39/dennys-quick-dirty-faq-153729/#post1766281

http://groups.homebrewtalk.com/Taproom_Facebook_Repository

Denny's Evil Concoctions is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 01:39 AM   #7
Snake10
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Denton,Tx
Posts: 208
Liked 7 Times on 6 Posts

Default

There is only one way to go and that is the way BobbyM stated above. McMaster Carr is the best! Use the numbers he gives above and don't look back. They have high temp seals in them. I bought 14 QD's for my system. Overkill but not really because they all have a use. don't shy away from the 90 degree. After hooking up to my build i found out quickly that the straight barbs (i chose by looking at the catalogue)will allow your tubing to kink. The 90 degree barbs (BobbyM's numbers) allowed the liquid to flow perfectly with no kinks and stress. Set up an account with McMaster and your parts will be at your door the next day or two.

__________________
Snake10 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 02:01 AM   #8
RonRock
Always Ready
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
RonRock's Avatar
Recipes 
 
Join Date: Jul 2008
Location: Underwood, Iowa
Posts: 1,317
Liked 7 Times on 7 Posts
Likes Given: 2

Default

I like the cam locks. Anybody use them in their brewing?

__________________
My Brutus Build

http://www.lonewolfbrewery.com/
RonRock is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 08:15 AM   #9
Denny's Evil Concoctions
Grande Megalomaniac
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Denny's Evil Concoctions's Avatar
Recipes 
 
Join Date: Oct 2005
Location: West Kelowna BC, Canada
Posts: 7,767
Liked 51 Times on 42 Posts

Default

Quote:
Originally Posted by RonRock View Post
I like the cam locks. Anybody use them in their brewing?
I am now. They seem to seal real well. No actual o-ring or anything. I'll let you know post brew day.

I finished mods on my keggles. Was trying out the pump and realized the 3/4" braided tubing I was going does not have thick enough walls. The input side starts to collapse with hot water. Damn. back to the store. (I've been back and forth to store(s) so many times in the last 2 days I can't count any more).

I had a feeling those walls were to thin. Guy at the store said they would be fine. Always go with your gut.

Added a sight tube to the MLT so I can monitor the water level during sparge without having to climb up and remove the lid.

Well if I can get the hoses sorted out in the morning I will be brewing on this by the afternoon. Direct fired rims. Might change over to a herms later down the road.
__________________

I may not be an expert, but I did stay at a Holiday Inn Express........ 6 months ago.

http://www.homebrewtalk.com/f39/dennys-quick-dirty-faq-153729/#post1766281

http://groups.homebrewtalk.com/Taproom_Facebook_Repository

Denny's Evil Concoctions is offline
 
Reply With Quote Quick reply to this message
Old 11-16-2009, 05:00 PM   #10
HIM_Tattoos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2007
Location: Green Bay, WI
Posts: 366
Liked 3 Times on 3 Posts
Likes Given: 4

Default

Sorry to bump a dead thread, but any word on these Denny's?

__________________
HIM_Tattoos is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need suggestions for dis-connects cptsparkle Equipment/Sanitation 14 10-19-2010 10:26 PM
Forgot my keg connects and i'm at a picnic!!!! Brewkowski Bottling/Kegging 10 07-24-2009 05:05 PM
Quick connects for a CO2 manifold gregdech Bottling/Kegging 3 10-21-2008 12:14 PM
Quick - Anyone know the 12 gallon line on a Miller Keggle? EdWort All Grain & Partial Mash Brewing 1 06-02-2007 05:35 PM
Quick connects..... Beermaker Equipment/Sanitation 4 02-10-2006 12:24 PM