Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > KEg inserts for no foam....help with thread
Reply
 
LinkBack Thread Tools
Old 09-08-2010, 12:21 PM   #11
ILOVEBEER
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: CA
Posts: 728
Liked 5 Times on 5 Posts
Likes Given: 1

Default

Extenze?

__________________
ILOVEBEER is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2010, 03:20 PM   #12
Catt22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 4,998
Liked 57 Times on 55 Posts
Likes Given: 51

Default

FYI, you can get a very similar effect using 1/4" OD polyethylene tubing that is sold as ice maker water supply line. You can buy the tubing at most any hardware store, Home Depot etc. It's very cheap at about $3 for a 25 ft coil. The tubing is semi-rigid which makes it easy to install and also easy to remove for cleaning purposes. Slip it into the dip tube and trim the ends flush with a sharp utility knife. Works like a champ.

__________________
Catt22 is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2010, 03:38 PM   #13
Brew-boy
Feedback Score: 0 reviews
 
Brew-boy's Avatar
Recipes 
 
Join Date: May 2006
Location: Lapeer, Michigan
Posts: 2,415
Liked 13 Times on 10 Posts
Likes Given: 9

Default

I bought these and some of these "Sticks" would not go inside the dip tube, some did some did not.

__________________
Next:Smoked Pilsner.
Primary:Belgian Red, American Stout w/Roeselare
On Tap:Pale Ale, English Bitter
Aging: Imperial Oatmeal Stout on Vanilla beans.

I rather owe you a dollar than cheat you out of it.."Dad"

http://lapeerareabrewers.com/

http://groups.yahoo.com/group/LapeerAreaBrewers/
Brew-boy is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2010, 07:37 PM   #14
Hammy71
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Hammy71's Avatar
Recipes 
 
Join Date: Sep 2008
Location: , Maryland, The Tax Me State
Posts: 5,601
Liked 413 Times on 317 Posts
Likes Given: 619

Default

I only use them when I'm gonna take my keg some where and I'm using a short party tap. With my 10ft 3/16 beer lines at serving temp I'm fine with out them. But with the 3' party tap the beer simply comes out to fast and foams. One or two of the sticks in the diptube will reduce the speed of the beer coming out of the tap, therefore reducing the foam. 10-12 psi with a party tap is easily done with these....

__________________
Hammy71 is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2010, 07:40 PM   #15
Ciliorozo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: St Petersburg, FL
Posts: 236
Liked 7 Times on 7 Posts
Likes Given: 2

Default

ILOVEBEER:

I thought this was familiar. This topic was discussed in your post here
http://www.homebrewtalk.com/f51/need...please-186411/

You must be brewing some strong beers there
cheers

__________________
Ciliorozo is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2010, 07:40 PM   #16
BargainFittings
Sponsor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 1 reviews
 
BargainFittings's Avatar
Recipes 
 
Join Date: Nov 2008
Location: Allen TX
Posts: 1,906
Liked 52 Times on 45 Posts
Likes Given: 3

Default

Quote:
Originally Posted by Catt22 View Post
FYI, you can get a very similar effect using 1/4" OD polyethylene tubing that is sold as ice maker water supply line. You can buy the tubing at most any hardware store, Home Depot etc. It's very cheap at about $3 for a 25 ft coil. The tubing is semi-rigid which makes it easy to install and also easy to remove for cleaning purposes. Slip it into the dip tube and trim the ends flush with a sharp utility knife. Works like a champ.
Brilliant. And the plastic is food grade.
BargainFittings is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
too much foam, done everything i can think of jordanpace DIY Projects 11 08-18-2010 09:26 PM
Foam Galore loxnar DIY Projects 29 01-23-2010 01:20 AM
Foam lid for 10 gallon mlt egurney DIY Projects 8 01-06-2009 06:03 PM
Expandable foam insulation cactusgarrett DIY Projects 14 09-06-2008 05:00 PM
foam board for fermentation chiller jonasmdavidson DIY Projects 5 02-14-2008 03:52 AM