Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > Keezer…with tower taps?
Reply
 
LinkBack Thread Tools
Old 07-30-2009, 04:16 PM   #1
LandoCalrissian
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: NJ
Posts: 24
Liked 1 Times on 1 Posts

Default Keezer…with tower taps?

I've seen (and been very impressed by) the kegeraters people build here. The dominant mode seems to be to put an extra layer between the lid and body of a chest freezer, and put forward facing taps on there.

My question is: does anyone cut holes in the top, and put taps up there, instead? Would the insulation be much harder, or is there some other reason why this isn't done? Or is it?

Sorry for the nub question, I've just been wondering.

__________________
LandoCalrissian is offline
 
Reply With Quote Quick reply to this message
Old 07-30-2009, 04:20 PM   #2
Kelsch
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Twin Cities, MN
Posts: 299
Liked 1 Times on 1 Posts

Default

Check Jester's Keezer Build

http://www.homebrewtalk.com/f51/keezer-project-31221/

Probably a little grander than most, but it sure is purty!
__________________

No trees were killed in the posting of this message. However a large number of electrons were terribly inconvenienced.

Kelsch is offline
 
Reply With Quote Quick reply to this message
Old 07-30-2009, 04:22 PM   #3
camiller
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2007
Location: Omaha, NE
Posts: 1,882
Liked 28 Times on 28 Posts
Likes Given: 9

Default

Quote:
Originally Posted by Kelsch View Post
I have seen both "Irish Coffin Box" like Kelsch linked above and more common towers around here.
camiller is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 08:07 AM   #4
ODP
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: New Braunfels, Texas
Posts: 365
Liked 2 Times on 2 Posts

Default

Lando, I'm considering building a keezer as well and I've been wondering about this too...

I guess one of the main benefits of having the taps on the front, instead of a tower is that you won't have to rig up a fan of some sort to cool the air in the tower, right?

I think the height of the taps on a tower would be just right, and that the taps on the front of the keezer would be too low...is this the case?

__________________
ODP is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 02:47 PM   #5
Iowabeerguy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Johnston, Ia
Posts: 57
Default

I built mine similar to the 'Keezer' Project mainly because I was concerned with having to pull the keezer away from the wall far enough to clear the wall when I lift the lid. Spent tons of time building a box that is mounted on hinges so that I can hinge it down, then lift the lid. My keezer slides very easily on the carpet, I never hinge the box down, but I do like how it looks.

I have not added cooling into the box, I usually just pull half a pint and dump it, then it's good to go.

__________________
Iowabeerguy is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 02:59 PM   #6
tokolosh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Portland, OR
Posts: 95
Default

I built mine with a tower and have no problems. I cut a hole straight through the top and insulation for the beer lines to run. I did insulate the inside of my tower with some flexible styrofoam. I have no problems with keeping the beer cold, i say go for it!

I also think a lot people put their taps on the front of the keezer to keep costs down, especially if you're going to have more than 2 taps!

__________________
"A single fact can spoil a good argument." - Anonymous
tokolosh is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 02:59 PM   #7
chumprock
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Rochester, NY
Posts: 1,043
Liked 33 Times on 23 Posts
Likes Given: 6

Default

I used towers. I did not drill full holes the diameter of the tower, I merely drilled large enough holes to pull the lines through.



I dont have any issues with foam or warm beer, though I'd bet about 4-6 inches of line in the tower does not actually stay cold.

The only issue I might complain about is that I have to pull the keezer out a foot or so to properly open the lid when I swap out kegs. But really? It's not that big of a deal.

__________________
chumprock is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 05:34 PM   #8
jpc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Santa Clara, CA
Posts: 1,910
Liked 60 Times on 45 Posts

Default

Here's a (maybe not-so) dumb question...

The biggest knock on using towers on a chest freezer is that the lid has to flip up for access. I'm sure we've all seen the "ricer-boi" types that put gullwing-style doors on their Honda Civics. Using this for inspiration, has anyone figured a way to make the freezer lid pivot or slide, rather than lift?

__________________
jpc is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 08:32 PM   #9
Xakk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Tulsa, OK
Posts: 124
Liked 2 Times on 2 Posts

Default

I've considered mounting the hinges on the front (and doing something to hide them from view) so the lid lifts towards you instead of towards the wall. But without side access to the keezer, you'd still have to pull it away from the wall to load or unload, and even then there might not be enough clearance. It may be way more trouble than it's worth, but you wouldn't bang the tower on the wall.

I personally prefer a tower or coffin over running through the collar. I've got tight spaces around my place, plus kids. I'm paranoid about bumping into a tap when I walk by and making a mess.

__________________
Xakk is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2009, 06:55 AM   #10
ODP
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: New Braunfels, Texas
Posts: 365
Liked 2 Times on 2 Posts

Default

What about having the hinges on the side? Has anyone tried this?

__________________
ODP is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tower diameter for 2 taps jspence1 Equipment/Sanitation 11 03-11-2014 08:39 PM
For Sale - Wanted. Tower and taps. San Fran CA brewjack For Sale 1 06-15-2009 01:02 AM
Homemade and super ugly taps/tower? geodave Equipment/Sanitation 10 06-11-2009 04:39 AM
Keezer Tower dutch101st Bottling/Kegging 7 04-05-2009 03:05 AM
Plugging keezer holes for future taps cardwookie Bottling/Kegging 4 03-25-2009 10:59 PM