rdkopp0153

Recipes 

I just converted 3 kegs to keggles and am left with the cut out top piece still attached to the inside rod (looks like a small umbrella). Has anyone come up with a good DIY project for the left over pieces?

aquenne

Recipes 

Ive converted mine into a false bottom for the mlt (without the spear obviously).

Cut a bunch of slits and drilled plenty of holes in it.

mccumath

Recipes 

Here is what I did with the dip tube and ball that was in the valve. Nothing crazy, but it works well. Also used the valve itself to help build the jig to cut off the top.

http://www.homebrewtalk.com/f51/easy-sanke-dip-tube-hop-sock-296701/

__________________
Put it all in the primary, and let the BeerGods sort it out

rdkopp0153

Recipes 

I like both of these ideas, thanks!

Garyr2973

Recipes 

Cut the dip tube off of one of mine and made it into the handle of my stir paddle.

Huaco

Recipes 

I am bottom-draining all my keggles. This is actually the bottom of a keg that I turned into a FB. 1200 holes drilled with a #40 drill. (well, actually 2 drills) LOTS of patience. I used a cutoff wheel on an angle grinder to do the slots. FB works REALLLLLLLY well.

rdkopp0153

Recipes 

Thanks again for some cool ideas, I'll update if I brainstorm anything else.

Huaco

Recipes 

How's this project going?

rdkopp0153

Recipes 

I decided to put graduation marks on the old keg spear and use it for volume measurements.