Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > Icebox
Reply
 
LinkBack Thread Tools
Old 10-01-2012, 03:13 PM   #81
vinper
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Houston, Tx
Posts: 330
Liked 10 Times on 9 Posts

Default

working pefectly . I need to change the after market latches. junk, they sit crooked when latching pressure is applied . I change out compressors at work so silver soldering was nothing. The detail I kinda hand did with a hand router and a big wood file. I still need to put a covering material on the inside . Also I have a 1 gallon bottle on the inside which catches the ice melting off the coil when compressor cycle's off , the fridge had it run to a evaperation catch tray mounted ontop of the exterior compressor..

__________________
vinper is offline
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 03:20 PM   #82
vinper
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Houston, Tx
Posts: 330
Liked 10 Times on 9 Posts

Default

The base was trickey it is a seperate piece from the top . and the top slide /fits in to the base. lots of pics if you need

__________________
vinper is offline
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 03:21 PM   #83
TwoRiders
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Perkasie, PA
Posts: 62
Liked 1 Times on 1 Posts
Likes Given: 4

Default

So i guess the level of welding is going to be beyond someone with a flux core and some level of comfort with welding sheetmetal and larger stock.

I'm thinking a dorm fridge cut up would be better for me as long as I don't cut through anything.

although mine is going to be much smaller
5foot high 3 foot wide 1.5 foot deep.
and only one chamber will be truely cold.

__________________
TwoRiders is offline
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 03:41 PM   #84
vinper
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Houston, Tx
Posts: 330
Liked 10 Times on 9 Posts

Default

silver solder is just like soft solder except it needs more heat mapp gas and it flows toward the heat practice very simple . Only had to connect 2 lines ,and install a schader fitting .but you will need a vacumn pump to test for leaks and clean the system

__________________
vinper is offline
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 04:15 PM   #85
jsguitar
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jsguitar's Avatar
Recipes 
 
Join Date: May 2011
Location: Overland Park, KS
Posts: 1,027
Liked 93 Times on 72 Posts
Likes Given: 421

Default

Just wanted to say awesome build! Good idea on using the bigger fridge btw. I built a small box around a dorm fridge years ago to fit one carboy and it just didn't have much power at all. I ending up scrapping the whole thing.

__________________
jsguitar is offline
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 04:51 PM   #86
TwoRiders
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Perkasie, PA
Posts: 62
Liked 1 Times on 1 Posts
Likes Given: 4

Default

Vinper the more pictures the better!

I'm pretty good about following plans this will be my first custom build based off a bunch of pictures ive been downloading.

the welding isn't really welding then its really soldering pipe just with silver solder and more heat?

if so not a problem!

__________________
TwoRiders is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Antique icebox to kegorator tulsabrewdaddy DIY Projects 21 12-09-2012 11:18 PM
Lagering in an Icebox paint_it_black DIY Projects 5 03-08-2010 08:41 PM
Antique styled Icebox Kegerator Scalliwag DIY Projects 5 12-19-2006 12:12 PM