Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Help with vintage keggle build?

Reply
 
LinkBack Thread Tools
Old 08-31-2010, 04:47 AM   #1
WAFFLE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Winnipeg, Manitoba
Posts: 6
Default Help with vintage keggle build?

I recently found a vintage keg on the cheap and was hoping to turn it into a keggle. I'm having a bit of trouble removing which i think was a very old tap from it though. I just wanted to check to see if anyone knew a better way to remove it rather than using my last resort of brute force.



Here's a top view:




Thanks a bunch!

Happy brewing

__________________

Last edited by WAFFLE; 08-31-2010 at 04:49 AM.
WAFFLE is offline
 
Reply With Quote Quick reply to this message
Old 08-31-2010, 10:24 PM   #2
ScubaSteve
Feedback Score: 0 reviews
 
ScubaSteve's Avatar
Recipes 
 
Join Date: May 2007
Location: New Bern, NC
Posts: 3,674
Liked 61 Times on 46 Posts
Likes Given: 11

Default

It looks like the coupler has a twist-lock, like a sanke. A little brute force doesn't hurt, as long as you're not stripping threads, etc.

That keg looks pretty awesome, since your drain will be lower than the average keg. Nice find!

ScubaSteve is offline
 
Reply With Quote Quick reply to this message
Old 08-31-2010, 11:01 PM   #3
kirscp
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Posts: 229
Default

It's a "Golden Gate" keg.

http://www.kegworks.com/blog/2009/07/15/golden-gate-keg-tap-couplers/

__________________
kirscp is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2010, 01:52 AM   #4
buzzkill
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Green Country Oklahoma
Posts: 987
Liked 20 Times on 20 Posts
Likes Given: 15

Default

and the valve is threaded in by the brass ring with the four slots. so you can go weldless. just get the tap out,then put a big old screw driver into one of the four slots,and use the hammer to unscrew it.




actually, that looks like the back of the valve. some one put it in backwards, so just get the big screwdriver out and hammer, and screw out the brass ring.

__________________
buzzkill is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2010, 02:02 AM   #5
buzzkill
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Green Country Oklahoma
Posts: 987
Liked 20 Times on 20 Posts
Likes Given: 15

Default

yes..its the back of the valve. I just looked at mine. its just in backwards. screw out the ring with the four slots.

__________________
buzzkill is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2010, 03:21 AM   #6
WAFFLE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Winnipeg, Manitoba
Posts: 6
Default

Thanks for the replies everyone! It's greatly appreciated.

__________________
WAFFLE is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2010, 05:15 AM   #7
WAFFLE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Winnipeg, Manitoba
Posts: 6
Default Update

I got it out thanks to you all. Thanks a bunch. As soon as I can find a place in Winnipeg, Manitoba that will be able to cut the top off for me I'll be able to start my build.

Thanks again!

__________________
WAFFLE is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keggle Build eppo DIY Projects 4 05-10-2010 07:36 PM
Keggle build 57plymouth DIY Projects 14 04-01-2010 01:03 PM
Keggle Build (help with leak!) aeonderdonk DIY Projects 4 08-30-2009 10:54 AM
Help with keggle/mashtun build Krelja DIY Projects 17 08-08-2009 03:50 AM
Help me build my keggle! Zacharomyces DIY Projects 14 05-13-2009 01:14 AM



Newest Threads