New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > DIY Projects > Help with my new Keggle




Reply
 
LinkBack Thread Tools Display Modes
Old 09-27-2009, 10:50 PM   #1
J-ROD
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Knoxville, TN
Posts: 44
Liked 1 Times on 1 Posts

Default Help with my new Keggle

A little back story.... I scored a keg and set out to make a keggle. I can't weld and mentioned the project at work. one of the guys offered to have a friend (who welds for a living) cut the top off and weld up the two couplings for me. A month goes by and I get it back and the couplings have two b.b. size weld splatter spots in the couplings.

I'm out $37 dollars and I can't tell the guy I work with his buddy sucks & needs to fix it. Any ideas on how to save the couplings without having them cut out and replaced ? Any advice is greatly appreciated.



__________________
J-ROD is offline
 
Reply With Quote Quick reply to this message
Old 09-28-2009, 12:09 AM   #2
BuckyBrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Posts: 25
Default

Is it an actual hole or is is splatter from the weld? If it is splatter from the weld you should just be able to knock it off with a file. Can you take a picture of it so we can see?



__________________
BuckyBrewing is offline
 
Reply With Quote Quick reply to this message
Old 09-28-2009, 12:21 AM   #3
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 1 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Piscataway, NJ
Posts: 21,733
Liked 853 Times on 572 Posts
Likes Given: 26

Default

If it's just stuck a bit to the surface, you should be able to chase it out with a nipple. If it's really in there, you'll have to have someone clean it out with a pipe tap.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 09-28-2009, 01:22 AM   #4
J-ROD
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Knoxville, TN
Posts: 44
Liked 1 Times on 1 Posts

Default

The spots are not holes but weld on the threads. I'll see if i can knock it off with a cold chisel. If not I'll pick up a tap tomarrow. Thanks !
(Sorry for the lack of pics....the digicam needs batteries)

__________________
J-ROD is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keggle jsloan Equipment/Sanitation 4 06-03-2008 04:47 PM
looking for someone to help with keggle GarciasHomeBrew Equipment/Sanitation 12 11-30-2007 06:07 PM
Help with Keggle BuffaloSabresBrewer Equipment/Sanitation 19 11-22-2007 10:15 PM
Keggle ? covered95 Equipment/Sanitation 3 11-09-2007 11:53 AM
Keggle Conundrum(aderol+boredom=Keggle) Ivan Lendl Equipment/Sanitation 2 05-19-2006 01:02 AM