Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > Help in making a CO2 manifold
Reply
 
LinkBack Thread Tools
Old 07-29-2008, 06:01 PM   #1
cbird01
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2006
Posts: 167
Default Help in making a CO2 manifold

I am currently changing my 1 keg system into a 4 keg system. I need help in designing or procuring a manifold. I will be going through the side of the fridge and storing CO2 outside. My questions are:

1) Can I get by without individual guages/control for each keg? What are the downsides?
2) Any design considerations for being able to force carb one keg while the others are attached? (I like to kick the pressure up to 35psi for 3 days on new keg)
3) Any tips for avoiding leaks? (ie special connection consideration)
4) Good places to source the block manifolds and parts?
5) Connection to air line tips? (ie ditch the plastic dohickies)

I am getting the beer lines/air lines/ball valves/shank-nipples/and taps from Bevverage Factory. Also heard about quick connects for air lines instead of clamps so I wouldn't mind building those into the design.

Thanks for any advice.

__________________
cbird01 is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2008, 07:21 PM   #2
camiller
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2007
Location: Omaha, NE
Posts: 1,882
Liked 28 Times on 28 Posts
Likes Given: 9

Default

1) yes, the downside being that all of your beers will be carbed the same. Iff your anal about such things you would want to carb each beer as appropriate for each style of beer, otherwise just pick a good middle ground that you like and carb them all the same.

2) If this is the case, you will want a secondary regulator. Set your primary to 35, connect a "Y" to it one going to a hose/connector for force carbing (also useful for a counter pressure bottle filler) and another going to the fridge for serving. Have the secondary in the fridge set at serving pressure and going to your manifold or what ever other distribution system "Y"s "T"s etc your planning on.

3) Teflon tape where fittings screw in. Oetiker clamps for hose barbs. Turn on the pressure and spray with starsan or liquid soap that will bubble if there is a leak.

4) I have a couple of these: http://www.harborfreight.com/cpi/cta...emnumber=93979 there are two openings on one side as shown and one on the opposite. Unscrew the plug and use a nipple to connect tow together and you would have a five way splitter. Not the most elegant but it would work. Alternatively Search beverage factory for "manifold". looks like they stock two and three way blocks that can be chained together for whatever number you need.

5) what plastic dohickies?

camiller is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2008, 08:02 PM   #3
Philip1993
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2007
Posts: 1,658
Liked 7 Times on 7 Posts
Likes Given: 4

Default

Quote:
Originally Posted by camiller View Post
3) Teflon tape where fittings screw in. Oetiker clamps for hose barbs. Turn on the pressure and spray with starsan or liquid soap that will bubble if there is a leak.
I dunk my whole harness in a sink of soapy water and turn on the gas. Give it about 5 minutes and you will know every joint is secure. Rinse, dry, use.

Be careful with the teflon. Flare fittings are designed not to use it, and can mis-seal if used.'

5. I think he means ball lock fittings.
__________________
Philip1993 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale - 5 way gas manifold conpewter For Sale 11 11-20-2009 08:00 PM
Making a manifold copper or pcv ? mgable Equipment/Sanitation 7 12-19-2007 12:04 AM
Is making your own manifold OK? Mr. Mojo Rising Equipment/Sanitation 5 04-17-2007 03:16 AM
Gas manifold. Orfy Bottling/Kegging 5 01-20-2007 12:17 AM