petrostar

Recipes 

Here's my issue. I'm about to paint my Brutus 10 and can't get into the top edges of the stand. It's 2" square steel and its a 2" gap. I want to clean the spatter off and smooth out the inner edge. Any tips or tools that would help would be awesome.

Drake9

Recipes 

Do you have any pictures to show more specifically what you are talking about?

lewdog50

Recipes 

dremel?

Kirch3333

Recipes 

An angle grinder with a larger diameter grinding wheel (7 inches) might be able to get into the gap a little better. The problem is that you can't just put a 7 inch wheel on a standard angle grinder. You'd need to find one that could accommodate a larger diameter

mattd2

Recipes 

Yeah picture would help a lot to explain your issue. My thoughts are rotate the guard (don't take it off though) so that the exposed edge is inline with the grip (if that makes sense )

__________________
My DIY grain mill
First AG mini-BIAB

petrostar

Recipes 

I will later. Im not home yet. It would take soooooo long with a dremel.

petrostar

Recipes 

Its a 4 1/2" grinder. Even without the guard it cant get in there.

mattd2

Recipes 

I think I understand your issue now... maybe a drill with a flap disc?

__________________
My DIY grain mill
First AG mini-BIAB

Drake9

Recipes 

HAHA I was going to suggest a file. The flap disc work great....I still would like to see pictures and then maybe suggest something different from that.

Monster Mash

Recipes 

This type of flapper wheel on an angle grinder works quick and wont dig too deep by accident.

__________________
My 1BBL Brewery Pics