bcsund86

Recipes 

I was trying to adjust the internal temperature of my keezer (using the instructions found in this thread) I adjusted the screw and plugged the freezer in and it worked fine, but didn't get to the right temp so I re adjusted the screw. Now when I plug the freezer in I hear a click noise every couple of minutes, but the freezer won't run. Is there any way to fix this without contacting a repair tech?

(i've tried adjusting the screw back to it's original position.)

Rivenin

Recipes 

mine does that as well, from what i've heard its the relay basically telling the compressor "you cannot turn on that frequently!" when it tires to come on to cool it back down.

make sure it's at where it was when you first got it at your house, plug it in and let it run for a few hours before doing anything else

__________________
RAINYDAY BREWING COMPANY
Lake Oswego, OR - EST 2010
120v Brutus 20 build
-------------------------------------------------------

kladue

Recipes 

You need at least 2-5 minutes between starts for the pressures to equalize in the refrigerant circuit, otherwise the compressor will stall and trip the current/ overheat switch attached to the side of the compressor.

bcsund86

Recipes 

Ok thank you guys! I will see if I can get it working.