Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > Final build up before my first brew.
Reply
 
LinkBack Thread Tools
Old 03-11-2012, 11:34 PM   #1
outrunu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Butte, MT
Posts: 50
Liked 1 Times on 1 Posts
Likes Given: 1

Default Final build up before my first brew.

So today, I finally had time to work on my brewery. I've been sourcing parts for a month or so now, and it's time to get them together.
Step one, finish mashtun.



I test fitted, and leak tested and everything was great. Then filled it with water, and I got a complete drain with my manifold design.

__________________
outrunu is offline
 
Reply With Quote Quick reply to this message
Old 03-11-2012, 11:38 PM   #2
paparker21
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Nasvhille, TN
Posts: 196
Liked 3 Times on 3 Posts
Likes Given: 5

Default

Nice, looks like you soldered all your fittings though- what are the plans for cleaning it?

__________________
paparker21 is offline
 
Reply With Quote Quick reply to this message
Old 03-11-2012, 11:39 PM   #3
outrunu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Butte, MT
Posts: 50
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Next, I moved to my keggles. To put a damper on any discussion, these were legally sourced through a local distributor.

I cut both freehand with my disc grinder.


Next, I drilled both for my ball valves, and my boil pot for a sight tube.




All I really have left to do at this point is put some fittings on my wort chiller, and I'm considering a sparge arm for the mlt. Get everything cleaned up, and I should be ready to get my first batch in.

Thanks for looking, and as always, comments and ideas for improvement are welcome.

__________________
outrunu is offline
 
Reply With Quote Quick reply to this message
Old 03-11-2012, 11:41 PM   #4
outrunu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Butte, MT
Posts: 50
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by paparker21 View Post
Nice, looks like you soldered all your fittings though- what are the plans for cleaning it?
Not all of the fittings are soldered. I can pull the manifold straight out and should have no cleaning issues. If I do, I can always redo it without the solder on any of the joints.
__________________
outrunu is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
my brew rig build nicksteck DIY Projects 167 11-25-2012 02:54 AM
My Brew Stand Build drumike102 DIY Projects 13 03-25-2011 01:08 AM
My Brew Rig Build bckyrdkid420 DIY Projects 5 03-21-2011 05:47 PM
My brew build DoubleFisted DIY Projects 13 03-17-2011 11:58 PM
A couple brew rig build ? Birdgunner DIY Projects 26 12-13-2010 01:16 AM