DWH7016c-This is the controller i have bought. I wired it up as the diagram said using an extension cord splicing and the controller does not work correctly. If i set it to 0c nothing happens... if i set it to say 30c the compressor kicks on but this is backwards from what SHOULD happen. anyone know what i need to do.
I looked at the wiring, it is designed to be wired only one way, so the problem is more than likely not wiring. I would read through the programming instructions and make sure you have it turning on and off in the right manner.
Brewright. All Rights Reserved. We reserve the right to brew and to help you brew. To protect the brew and defend the brew. To make the brew and drink the brew.
I got this from the other discussion. The thermostat is set to heat not cool.
1. Hold down set button for 3 seconds.
2. When HC appears press set button again.
3. It will most likely show H for heat. Press down arrow, should now show C for cold.