Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   Dry erase markers directly on keezer? (http://www.homebrewtalk.com/f51/dry-erase-markers-directly-keezer-358203/)

inamays 10-02-2012 02:27 AM

Dry erase markers directly on keezer?
 
Maybe a dumb question, but any reason why you couldn't just use dry erase markers directly on a smooth white chest freezer rather than painting it with chalk board paint or some other option? Anything about appliance surface that would make the dry erase markers permanent?

Thanks

swackattack 10-02-2012 02:40 AM

Nope,I do it

nasty_rabbit 10-02-2012 02:41 AM

It should work fine but test it somewhere out of sight with different colored markers. Red or blue tend to stain the image onto some surfaces with prolonged exposure. These "labels" will be there for however long the kegs last which could be a few weeks.

acidrain 10-02-2012 04:10 AM

I do it so much, that I actually make drawings and notes on my fridge in the garage. The green seems to be the hardest to wipe, but the spray cleaner (or just alcohol or Windex) wipes it right off.
Go for it!

inamays 10-02-2012 04:16 AM

Awesome thanks so much!!!

ncweasel 10-02-2012 11:49 AM

My fermentation fridge has black plastic covering the doors and i cleaned them with glass cleaner than sprayed them down with white board restorer\cleaner solution before writing on it with dry erase markers. seems to work great. i did have to buy neon colored markers to be visible on the black surface though.

inamays 10-03-2012 03:52 AM

1 Attachment(s)
Well then, here goes! :-)

Hang Glider 10-03-2012 01:16 PM

occasionally wipe it down with rubbing alcohol. Stains might be removed with De-Solv-it or Goo Gone or other orange-oil type product. Those will actually clean permanent marker, too.

SpookyAlmond 10-03-2012 02:59 PM

I was contemplating chalkboard paint when I saw this thread, then immediately went to amazon and ordered dry erase markers. It seems so obvious I don't know why I hadn't thought of it. Thanks for the idea!


All times are GMT. The time now is 12:57 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.