Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > DIY Bottling wand?
Reply
 
LinkBack Thread Tools
Old 02-17-2010, 08:52 AM   #1
ReverendTap
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Minneapolis, MN
Posts: 50
Default DIY Bottling wand?

Sorry if this has been covered, couldn't find it in a search.

I've got a couple feet of copper pipe left over from making my new immersion chiller. Already used some of the extra to make a new racking cane (damn plastic ones keep breaking) and I'll use a bit for a dip tube once my new kettle arrives, but I'll still have some left over, and at the moment I'm lacking a bottling wand and can't think of another good use for the pipe. Anyone know of a good way to throw a gravity valve or similar on there and make myself a nice metal bottling wand instead of buying another shoddy plastic one?

__________________
On Deck: No-Name Pale Ale, Hearthfire Housefire Winter Warmer
Primary: Nada
Secondary: Nada
Bottled: Rocky Mountain Irish Red, Frozen North Belgian Wit
ReverendTap is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2010, 02:05 PM   #2
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
IrregularPulse's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 42,812
Liked 2771 Times on 2720 Posts
Likes Given: 120

Default

Dude, they're $2.75. Is it even worth the time to try and rig something?

__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo
IrregularPulse is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2010, 05:17 PM   #3
ReverendTap
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Minneapolis, MN
Posts: 50
Default

Eh, it's more fun for me to put something together than just go buy it, and I don't want to waste any of the copper since it was pretty expensive to pick up. Got a better idea?

__________________
On Deck: No-Name Pale Ale, Hearthfire Housefire Winter Warmer
Primary: Nada
Secondary: Nada
Bottled: Rocky Mountain Irish Red, Frozen North Belgian Wit
ReverendTap is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2010, 10:03 PM   #4
camiller
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2007
Location: Omaha, NE
Posts: 1,882
Liked 28 Times on 28 Posts
Likes Given: 9

Default

Just so you know, generally you want to avoid contact with copper after fermentation. During ferm the yeast will scrub out any dissolved copper but afterwords not so much. Admittadly you are talking about a very short duration of contact in a racking cane or bottling wand but...

camiller is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2010, 11:29 PM   #5
lustreking
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Bethlehem, PA
Posts: 750
Liked 18 Times on 17 Posts
Likes Given: 6

Default

Quote:
Originally Posted by ReverendTap View Post
Eh, it's more fun for me to put something together than just go buy it
I couldn't agree with you more, however some things are just too inexpensive and hard to improve upon.
__________________

My brewing site:
http://brewing.lustreking.com

lustreking is offline
 
Reply With Quote Quick reply to this message
Old 02-18-2010, 09:33 AM   #6
ReverendTap
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Minneapolis, MN
Posts: 50
Default

Quote:
Originally Posted by camiller View Post
Just so you know, generally you want to avoid contact with copper after fermentation. During ferm the yeast will scrub out any dissolved copper but afterwords not so much. Admittadly you are talking about a very short duration of contact in a racking cane or bottling wand but...
This was not something I was aware of. After seeing old copper fermenters I just assumed it was harmless. Good to know.

Okay, so, scratch the bottling wand. I've got about three and a half feet of leftover 3/8" copper, would turning that into a pre-chiller for my IC have any noticeable effect, or is that short enough I should just leave it in storage until a more legit use presents itself?
__________________
On Deck: No-Name Pale Ale, Hearthfire Housefire Winter Warmer
Primary: Nada
Secondary: Nada
Bottled: Rocky Mountain Irish Red, Frozen North Belgian Wit
ReverendTap is offline
 
Reply With Quote Quick reply to this message
Old 02-18-2010, 10:12 AM   #7
ILuvIPA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: O-hi-O
Posts: 243
Liked 5 Times on 5 Posts
Likes Given: 2

Default

3.5' is too short for a pre-chiller. I made a really tiny one that took 10' of 3/8" The 10" got me 10 - 4" diameter coils. The coil stack is 6" high and the vertical standpipes are 12" high. The 3.5' you have would cover the standpipes but not much else.

Tried to think of a use for 3.5' but I got nuthin. . .make tin whistles?
http://en.wikipedia.org/wiki/Tin_whistle

__________________
ILuvIPA is offline
 
Reply With Quote Quick reply to this message
Old 02-18-2010, 12:35 PM   #8
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
IrregularPulse's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 42,812
Liked 2771 Times on 2720 Posts
Likes Given: 120

Default

Quote:
Originally Posted by ReverendTap View Post
Eh, it's more fun for me to put something together than just go buy it, and I don't want to waste any of the copper since it was pretty expensive to pick up. Got a better idea?
I understand DIY is fun. But as far as not wanting to waste any of it. IMO, using it for a bottling wand would be just that. You're using it for an impractical solution to a problem there is a better and cheaper solution for. So, IMO, that's wasting copper when cheaper plastic could be use more ideally.

I'd just leave it in storage. You never know when a small piece would be usefull. IE, I just went out last week and bought a 2ft peice for a thermowell for my HLT.
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo

Last edited by IrregularPulse; 02-18-2010 at 12:37 PM.
IrregularPulse is offline
 
Reply With Quote Quick reply to this message
Old 02-18-2010, 07:11 PM   #9
ReverendTap
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Minneapolis, MN
Posts: 50
Default

Fair enough, into storage it goes.

__________________
On Deck: No-Name Pale Ale, Hearthfire Housefire Winter Warmer
Primary: Nada
Secondary: Nada
Bottled: Rocky Mountain Irish Red, Frozen North Belgian Wit
ReverendTap is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
bottling question why use a bottling wand? sheldon123 Beginners Beer Brewing Forum 26 01-10-2013 07:44 AM
Bottling: Hoses very hard to remove from bottling wand and auto siphon IncredibleMulk Bottling/Kegging 14 01-11-2010 06:28 PM
My bottling wand is gone... rflem550 Bottling/Kegging 6 10-06-2007 05:31 PM
Oxygenation through Bottling Wand. BrooZer General Techniques 9 04-16-2007 03:39 PM
clogged bottling wand todd_k Bottling/Kegging 5 10-15-2006 01:08 AM