Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > DIY Beer Crate [24 - Sierra Nevada Bottles] Sketchup Plans
Reply
 
LinkBack Thread Tools
Old 04-30-2012, 02:01 PM   #1
Neilyboy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Germantown Hills, Illinois
Posts: 54
Liked 8 Times on 7 Posts
Likes Given: 2

Default DIY Beer Crate [24 - Sierra Nevada Bottles] Sketchup Plans

I had been wanting to get away from the cardboard boxes for some time now. I drew up some plans in sketchup for a crate (stackable) which would hold 24 Sierra Nevada bottles perfectly. First off I have to say Menards around here anyways has the worst lumber around so if available pickup your material at lowes. (Item #: 1407 - 1" x 2") (Item #: 935 - 1" x 3") (Item #: 940 - 1" x 4") cheapest I could find and best material. I have made 3 of these now (one floor and two stackable). I used a kreg jig to assemble the boxes. Pictures are self explanatory download the sketchup files from:

http://http://neilyboy.mtco.com/sket...oogleSketchup/





































The plans do not show you how to make the stackable crates but you simply replace the bottom 1"x3"x18" with a 1"x4" which allows the bottom to overhang an inch on either side and locks in quite nicely.

Also there are two designs for the dividers the easy fit ones should slide in nicely I made them at full length and they took a bit of patience to get them in there (they are however a snug but very nice fit).

Feel free to ask any questions you may have but they work perfectly and are quite simple to build. I will take some photos tonight with a decent camera and post a better picture below.

Neil

__________________
Neilyboy is offline
unfairbeef Likes This 
Reply With Quote Quick reply to this message
Old 04-30-2012, 02:25 PM   #2
Neilyboy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Germantown Hills, Illinois
Posts: 54
Liked 8 Times on 7 Posts
Likes Given: 2

Default





















Neil
__________________
Neilyboy is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 03:44 PM   #3
Hang Glider
Beer Drinker
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Hang Glider's Avatar
Recipes 
 
Join Date: Mar 2007
Location: North Augusta, SC
Posts: 3,153
Liked 147 Times on 118 Posts
Likes Given: 100

Default

nice work, Neil!

__________________
Hang Glider is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 04:57 PM   #4
Wigs
Feedback Score: 1 reviews
Recipes 
 
Join Date: Apr 2012
Location: , MA
Posts: 19
Default

Wow! I like the design a lot. I was thinking about making some for 22oz. bombers, and this gives me some good ideas. Thanks for sharing.

__________________
Wigs is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 06:22 PM   #5
lizardeye
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: New Bedford, MA
Posts: 59
Liked 2 Times on 2 Posts
Likes Given: 6

Default

I love my Kreg jig. I just sketched out some plans for something like this myself. Thanks for the write up. It'll help me refine my own design!

__________________
lizardeye is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 07:26 PM   #6
Neilyboy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Germantown Hills, Illinois
Posts: 54
Liked 8 Times on 7 Posts
Likes Given: 2

Default

For as cheap as the R3 ($40) kit is its worth every penny. If you have the $$ grab the master system but the R3 worked great for this project. I am no carpenter but the joints the kreg system makes are amazing. I can flip a crate upside down and stand on it without issue. I know the post is somewhat a mess but if you have sketchup installed you should be able to find your way through the plans.

Neil

__________________
Neilyboy is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 10:26 PM   #7
lizardeye
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: New Bedford, MA
Posts: 59
Liked 2 Times on 2 Posts
Likes Given: 6

Default

Yeah, I have the R3 and the next model up. One short of the Master system. It was about $100, but I've saved 3x that just building shelves !

__________________
lizardeye is offline
 
Reply With Quote Quick reply to this message
Old 04-30-2012, 11:55 PM   #8
OneHoppyGuy
HBT_SUPPORTER.png
HomeBrewTalk 2012 Vendor Giveaway Participate
Feedback Score: 0 reviews
 
OneHoppyGuy's Avatar
Recipes 
 
Join Date: Nov 2009
Location: Concord, CA
Posts: 1,704
Liked 40 Times on 33 Posts
Likes Given: 52

Default

I tried making one... I cut the board twice and it was still too short.

That crate looks awesome! you should market them.

__________________

Brewright. All Rights Reserved. We reserve the right to brew and to help you brew. To protect the brew and defend the brew. To make the brew and drink the brew.

BrewSteel.com
BrewSteel on Facebook

OneHoppyGuy is offline
brew_ny Likes This 
Reply With Quote Quick reply to this message
Old 05-01-2012, 12:46 PM   #9
Neilyboy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Germantown Hills, Illinois
Posts: 54
Liked 8 Times on 7 Posts
Likes Given: 2

Default

Quote:
Originally Posted by OneHoppyGuy View Post
I tried making one... I cut the board twice and it was still too short.

That crate looks awesome! you should market them.
Still too short?
you need a board stretcher!

I am just wondering if you see an issue with the design. I have made three and they all turned out lol.. only thing I have not done is created the 'easy fit' dividers I used my first design which was off a bit but fits. those dividers are here..

http://neilyboy.mtco.com/sketchup/Be...ider-short.jpg
http://neilyboy.mtco.com/sketchup/Be...vider-long.jpg

The easy-fit should still work as they are only an 1/8" of an inch shorter yet divided out evenly.
hope that helps
neil
__________________

Neilyboy is offline
 
Reply With Quote Quick reply to this message
Old 08-09-2012, 03:17 AM   #10
mole41
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Location: Wichita, Kansas
Posts: 4
Default

Do you still have the sketchup file the link that you posted is broken. thanks

__________________
mole41 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How To Make A Beer Crate For 12oz Beer Bottles UncleDavid DIY Projects 273 10-13-2014 08:00 PM
DIY Wooden Beer Bottle Crate Jeepninja DIY Projects 36 03-17-2014 09:23 PM
How To Make A Beer Crate For 12oz Beer Bottles UncleDavid DIY Projects 0 04-05-2012 02:52 AM
Wooden Bottle Crate for 22oz Bottles mobilecabinworks DIY Projects 31 01-23-2012 03:22 AM
Sketchup Challenge IrregularPulse DIY Projects 2 01-14-2009 12:50 AM