Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   Designing my herms system (http://www.homebrewtalk.com/f51/designing-my-herms-system-154036/)

splobucket 12-29-2009 01:56 PM

Designing my herms system
Hello all. I've decided to start designing my own HERMS system, and I've thrown together a schematic. Eventually I'm going to need some assistance specifying different parts, but for now I'd just really like y'alls input. Am I missing anything major?

The photo is located on my twitpic account at http://twitpic.com/vqbe6.

The general idea is that I have my mash continuously circulating through my bypass, then when my temperature controller deems it necessary, switches flow to the copper coil in the hot liquor tank. When all is done, and lautered. The water from the hot liquor tank can be used for sparging. Again, is there anything major missing? I plan to continue to use my 10 gallon igloo cooler as my mash/lauter tun, and a keg for my hot liquor tank.

IrregularPulse 12-29-2009 02:03 PM

Don't know Herms, but can help post the pic.

I'm not 100% on this. I've not used my pump yet, but my question would be about how the pump would handle the switching of it's output. Would that break flow and cause the need for repriming?

All times are GMT. The time now is 11:47 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.