New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > DIY Projects > Comp Fitting on Immersion Chiller?




Reply
 
LinkBack Thread Tools Display Modes
Old 09-01-2011, 03:57 PM   #1
Guidry
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Denham Springs, La
Posts: 614
Liked 26 Times on 24 Posts
Likes Given: 4

Default Comp Fitting on Immersion Chiller?

Alright, I've had my rib cage IC at 99% completion since Super Bowl Sunday when a friend of mine who is a plumber was going to solder the two section together for me (used 2 25' sections instead of having to order a 50' continuous section). Anyway, every time we try to get together, something comes up and I am just tired of waiting now. Ace Hardware guy suggested a comp fitting to join the two. My only concern is would the temp changes cause enough contraction/expansion in the fitting and tubing to result in a leak?

Any opinions?



__________________
Guidry is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 04:34 PM   #2
BBL_Brewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
BBL_Brewer's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Kokomo, IN
Posts: 3,588
Liked 376 Times on 266 Posts
Likes Given: 250

Default

Chances are you'll be fine, but I would't trust a comp fitting in my beer. Why not take it a local plumbing shop and have them sweat it for you. Shouldn't cost more than 5 or 10 bucks and you'll never have to worry about it.



__________________
Slots Down Brewery
Stick with the plan....not the sparge.


Never Ending Liquid Yeast - How to Farm Yeast and Freeze it.

BBL_Brewer is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 06:54 PM   #3
63belair
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
63belair's Avatar
Recipes 
 
Join Date: Mar 2010
Location: , MA
Posts: 386
Liked 34 Times on 26 Posts
Likes Given: 47

Default

Get some extra copper and ask your friend to borrow an extra torch, and soldering supplies (guarantee he has extra). Practice on the spare pipe sections, and then return the supplies back to said friend (with a home brew of course) and keep newly learned skill!

Soldering isn't that hard, really! Check out youtube videos and just be patient (and careful)

__________________
63belair is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 06:59 PM   #4
Guidry
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Denham Springs, La
Posts: 614
Liked 26 Times on 24 Posts
Likes Given: 4

Default

Going with getting it soldered, somehow, some way....Hopefully this weekend.

Thanks for helping me decide.

__________________
Guidry is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 08:33 PM   #5
wncbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: sylva, NC
Posts: 431
Liked 13 Times on 11 Posts
Likes Given: 1

Default

Quote:
Originally Posted by 63belair
Get some extra copper and ask your friend to borrow an extra torch, and soldering supplies (guarantee he has extra). Practice on the spare pipe sections, and then return the supplies back to said friend (with a home brew of course) and keep newly learned skill!

Soldering isn't that hard, really! Check out youtube videos and just be patient (and careful)
+1, my "soldering starter kit for dummies" cost like 20 bucks at lowes. I practiced on some scraps and felt confident in half an hour. It really isn't hard at all once you get a feel for how much heat to apply. Good luck
__________________
wncbrewer is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 09:04 PM   #6
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 8,390
Liked 808 Times on 672 Posts

Default

Quote:
Originally Posted by wncbrewer View Post
+1, my "soldering starter kit for dummies" cost like 20 bucks at lowes. I practiced on some scraps and felt confident in half an hour. It really isn't hard at all once you get a feel for how much heat to apply. Good luck
How much heat - and where to apply it (hint: heat the fitting, not the tubing!)

Prep is a good 75%. Clean tubing ends and the inside of the fittings, apply a thin coat of the appropriate flux, assemble and heat the fitting just to the point that the solder goes nicely fluid and sucks into the joint...

Cheers!
__________________
day_trippr is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 09:37 PM   #7
BBL_Brewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
BBL_Brewer's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Kokomo, IN
Posts: 3,588
Liked 376 Times on 266 Posts
Likes Given: 250

Default

I heat the tubing but down a ways from the fitting so you don't burn up the flux

__________________
Slots Down Brewery
Stick with the plan....not the sparge.


Never Ending Liquid Yeast - How to Farm Yeast and Freeze it.

BBL_Brewer is offline
 
Reply With Quote Quick reply to this message
Old 09-02-2011, 12:31 PM   #8
mthompson
Feedback Score: 1 reviews
Recipes 
 
Join Date: Sep 2008
Location: Plymouth, WI
Posts: 467
Liked 28 Times on 16 Posts
Likes Given: 2

Default

You should definitely heat the fitting....ut gets tricky when you are sweating big brass ball valves, but it is a good skill to learn.



__________________
MT
------------------------------------------------------------------------------------------
Save me, O God! For the waters have come up to my neck. - Psalm 69:1
mthompson is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wort chiller with press fitting Joesf35 DIY Projects 3 02-18-2011 12:06 PM
Immersion Chiller - Under $30 weathejx DIY Projects 19 09-23-2010 07:45 AM
Immersion Chiller help Newbeerguy DIY Projects 12 11-25-2009 01:37 PM
Immersion Chiller in PDX nicadrick DIY Projects 1 11-13-2009 03:32 AM
New immersion chiller ghack DIY Projects 6 02-16-2009 10:34 PM