Kegconnection Complete Starter Kit and More Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > BulkHead Installation (Burr's)

LinkBack Thread Tools
Old 11-12-2013, 06:26 PM   #1
Feedback Score: 0 reviews
Join Date: Sep 2013
Posts: 5
Likes Given: 2

Default BulkHead Installation (Burr's)

I just drilled my first 7/8 hole using a step down drill bit on my SS Bayou Classic 8 Gal pot and I have some decent size burr's on the inside of the pot. Anybody else run into this problem or does anyone know how to take that off. Things I was thinking were a dremmel with a grinder bit or metal files to do by hand. Thoughts? Suggestions?

Br3wBee is offline
Reply With Quote Quick reply to this message
Old 11-12-2013, 06:43 PM   #2
Feedback Score: 0 reviews
Join Date: Jan 2013
Posts: 302
Liked 85 Times on 67 Posts
Likes Given: 2


I took my step bit and ran it very briefly on the inside of the pot at the end of the cut to clean up and then cleaned with a grinder wheel on a dremel. 5 minutes tops. If you go to, Bobby has videos of how to cut holes and install various mods to kettles and pots that are good, and I got that tip from him.

one-L is offline
Br3wBee Likes This 
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gonna go home and drink some burr 241 General Beer Discussion 13 01-26-2013 12:26 AM
Growth tip has turn into hop burr slomo Hops Growing 4 05-19-2011 06:38 AM
From Burr to Mature ~ How long? BarnabyHooge Hops Growing 5 10-01-2010 03:11 AM
Burr to cone? Rhoman Hops Growing 3 06-02-2010 01:02 AM
You CAN Crush with a Burr Mill! mew Equipment/Sanitation 3 10-12-2008 09:00 PM