Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   Brew stand build - almost complete! (http://www.homebrewtalk.com/f51/brew-stand-build-almost-complete-123120/)

Brewme 06-09-2009 02:47 PM

Brew stand build - almost complete!
 
Here are some pictures of my nearly completed brew stand. I got the gas lines plumbed last night and fired it up. Each burner is 175k BTU's. It was great. I am still needing to add the pump and diamond plating as a shelf on the bottom. I also have a fighter plane style toggle switch for the pump that I will mount with a piece of diamond plating in the upper corner.

I want to thank Bobby and The Bitter Brewer for their help and design ideas. Without those two guys, it would have been much more difficult to get this beast done. I used 1.5" square tubing and the thing is built like a tank.

EDIT: I can't get the pictures to post. They are in my gallery and you can get there by clicking these links. Does anyone know why the image button doesn't work?

http://www.homebrewtalk.com/gallery/...4&limit=recent

http://www.homebrewtalk.com/gallery/...5&limit=recent

http://www.homebrewtalk.com/gallery/...4&limit=recent

http://www.homebrewtalk.com/gallery/...5&limit=recent

Bobby_M 06-09-2009 02:55 PM

See the "BBCode" path in the gallery? Just copy/paste that into your post.

http://www.homebrewtalk.com/gallery/...ium/photo6.jpg

Very nice!!

I think you'll find that you want some kind of heat shield between the burners and your gas valve. After 10 minutes of run time, you'll need gloves to touch it.

Brewme 06-10-2009 03:01 AM

Good call. I have some spare diamond plating I can put between the two.


All times are GMT. The time now is 08:08 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.