Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > DIY Projects > BK diptube options
Reply
 
LinkBack Thread Tools
Old 01-23-2010, 07:58 PM   #1
Shaggyt
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Pittsburgh, PA
Posts: 163
Liked 1 Times on 1 Posts

Default BK diptube options

I'm adding a false bottom to my keggle and planning on upgrading my diptube to 3/4" rigid copper into a 1/2" ball valve. I had a 3/8" soft copper tube with compression fittings and very weak gravity flow...tempermental as well.
Any problems with this?

Also, what would be the best approach for the collection end of the of diptube? My options are:

1. use a cap and cut slits in the tube
2. use a cap and drill holes in the tube
3. leave tube open, set 1/2" from the keg bottom

My materials are:

3/4" rigid copper - leftover from plumbing repair
3/4" copper elbow 90
3/4" sweat-1/2" MPT connector, also copper
3/4" copper cap

Open to any/all suggestions...

__________________
Shaggyt is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2010, 04:37 PM   #2
ThePig
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Seattle
Posts: 86
Default

Why not use 1/2" OD flex copper? In my experience, using a larger dip tube than your valve/plumbing is capable of, only leads to breaking your siphon seal prematurely when siphoning. I have 1/2" valves and use 1/2" OD stainless tube set at about 3/8" from the bottm of my kettle. I also use a fine mesh screen on the end of my tube to block hop debris. The closer you set your tube to the bottom the less you leave in the kettle after the siphon breaks.

__________________
ThePig is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solder for diptube Shaggyt Equipment/Sanitation 1 01-21-2010 02:03 PM
The liquid your diptube can't reach nostalgia All Grain & Partial Mash Brewing 8 06-26-2009 10:26 PM
problem with diptube??? brewmasterpa Bottling/Kegging 10 02-28-2009 04:08 AM