Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   Beginning to build a RIMS system (http://www.homebrewtalk.com/f51/beginning-build-rims-system-266780/)

kdomrose 09-04-2011 05:35 PM

Beginning to build a RIMS system
 
I have finally started building a RIMS system.

There is now a blog with pictures started if anyone cares to follow the build progress. I will be doing updates in this thread and on the blog.

Wish me luck!!!

Karl

rudzy17 09-05-2011 01:22 PM

where's the link to the blog...nevermind i just needed to open my eyes and look.

kdomrose 09-10-2011 01:03 PM

Well I haven't been able to do any work on the rig this week. Work schedule was busy, busy, busy.

I did pickup a smaller burner to mount under the mash tun, just in case I need to do a step infusion, or if the RIMS tube burns out in the middle of a brew session. (I saw a friend have that happen.. )

I will try and get to the shop today and do some more work on the rig...

Karl

kdomrose 09-19-2011 12:28 AM

UPDATE...

Got to go and work on the rig again this week. I uploaded some more pics to my blog.

<--------The blog link is to the right. :D


Karl

kdomrose 10-28-2011 12:39 AM

Well,

I have finished the main framework. I have scrounged up 3 kegs.
I used a grinder and cut out all 3 tops.

I have drilled the holes and mounted a thermometer and 2 weldless ports in the hot liquor tank. I might go ahead and weld them in. Haven't decided yet.

Work has kept me busy so things are going slower than I want.


I will try and get some updated pictures onto my blog soon.


Karl

kdomrose 12-28-2011 05:35 PM

Update on brewrig
 
5 Attachment(s)
Ok..OK.. I know I haven't updated anything here in a while. I have been working on the rig.

Here are some pictures of where things are at.

I have the electrical controls all completed and tested. The gas lines and valves are all run and tested.

All that is left is the liquid lines. I am hoping to get things completed this week and to pop the cherry on this thing on January 2nd.


All times are GMT. The time now is 06:26 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.