Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   DIY Projects (http://www.homebrewtalk.com/f51/)
-   -   Barn wood kegerator remodel (http://www.homebrewtalk.com/f51/barn-wood-kegerator-remodel-387272/)

Coldies 02-04-2013 06:49 PM

Barn wood kegerator remodel
So after reading a lot of threads and looking at a lot of pictures I'm going to do a little remodel of my two tap kegerator. It can hold two 5 gal corny's with a 2.5 gal on the hump. I have a collar on it right now with my two perlicks and has served me well so far but my plan is to make it match our furniture so I can hopefully get it inside. Here is a picture of how its setup right now.


I just built our dining room table out of reclaimed barnwood from a tabacco farm in North Carolina, so that is the look im going for. Here is a picture of the table. Photo is a little washed out but you get the idea (And sideways for that matter, though I fixed that in "photosuckit" but I guess not)


Here is the barn wood I was able to pick up locally as well. Its a little darker but the concept is still there.


I plan on using the barn wood as my trim pieces with some tung oil on it to keep it natural and using possibly some stained birch for the other material. I have my platform built and will start on the sides this week. With 3 kids this project will be here and there but hopefully I will be able to get the sides built this weekend. I have a nice surprise that I'm going to be using for the Irish Coffin and plan on having 3 taps so I don't have to use my party tap for the 2.5 gallon corny.

tagz 02-04-2013 07:01 PM

Very cool table.

jonos7 02-05-2013 06:28 AM

I used old barn wood too, I love mine!

Coldies 02-05-2013 02:41 PM


Originally Posted by jonos7 (Post 4865991)
I used old barn wood too, I love mine!

Really dig that. I like the copper as well. Should patina nice as well.

Coldies 02-05-2013 02:47 PM

Not much as far as progress goes. Just got the base built.


My plan was to put the hinges on the existing collar but after some measurements I realized I needed to add about a inch or so the lid would sit flush with the collar. Since my existing collar in glued down nice and tight I decided I would just rip a piece and add it to the existing collar. I dont really mind the two pieces of wood since you will never see it unless your changing out the kegs. Once this "extra" piece is added I will be able to get my measurement to start building my side panels.

All times are GMT. The time now is 11:52 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.