cheese

Recipes 

This is my sanke keg fermenter washer.
I used a small dish washer, took the sprinklers out and drilled a hole on the top, works pretty good, once I'll find a way to spray the water (spary ball , nozzle ,???) it will work great.

__________________
http://www.homebrewtalk.com/f51/one-vessel-brewing-system-177583/

smooth

Recipes 

Would a soft rubber hose whip around and end up sraying the complete insides?

cheese

Recipes 

I'm not sure I understand the question, do you suggest to replace the copper pipe with a rubber hose? That may work.

__________________
http://www.homebrewtalk.com/f51/one-vessel-brewing-system-177583/

jeepinjeepin

Recipes 

How about a small shower nozzle?

__________________
Walmart is about the only reason for open or concealed carry that I can get behind. -Randar

cheese

Recipes 

That also an option, but I'm not sure it will spray sideways, the most important part is the lower part of the keg where the krausen is.

__________________
http://www.homebrewtalk.com/f51/one-vessel-brewing-system-177583/

jeepinjeepin

Recipes 

I was thinking it would run down the walls...or you could get a spray ball

__________________
Walmart is about the only reason for open or concealed carry that I can get behind. -Randar

gopherh3

Recipes 

I just drpp a fountain pump in a rain barrel and pump warm soapy water up into an inverted keg (PVC wand goes up through the bung to the top of the keg) and let the pump run for about 20 minutes. As many kegs as you need to wash out, just turn the pump off and swap kegs. Once they're all cleaned, repeat with fresh water and you're ready to go.