Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > 5cf Keezer Build
 
 
LinkBack Thread Tools
Old 08-29-2012, 05:29 PM   #1
allen00se
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Tulsa, Oklahoma
Posts: 13
Default 5cf Keezer Build

GE Freezer from home Depot $189.00
TS-21 Temp Controller from Dwyer $50.00
TS2-010 Temp Probe from Dwyer $10.00

Scenario:
I have a Wetbar in my Living room (Pics to come) that has its own storage closet. I plan to have the keezer in this closet then run beer lines approx 6' to the wetbar. This freezer appears to have enough room for 3 kegs, so I want to run 3 beer lines. Line cooling will be done via cold air circulation from keezer.

So here it goes:
Freezer as bought sitting in my driveway. I like the overall build and size of the freezer. I run 3 gallon kegs to save space and so that I can finish the keg before it goes bad. I can fit two of my kegs in the lower portion of the freezer and 1 on the step with my co2. Also the freezer has rear and side access to the compressor/electrical bay for rewiring.


Top view with keg and co2 sitting on the step


Time to get to work replacing the original temp controller with a digital one. The original is just clipped in and pops out easy enough. With the wires exposed its easy to see which ones I need to steal to hotwire the freezer
Original Temp Controller wiring


So i temporarily spliced in the digital temp controller. Originally I was planning on permanently locating it in the old temp controller home... but who wants to walk into the closet to peek at the temp. I am thinking I will mount it in the bar right next to the taps. Anyway here it is all hooked up and cooling as expected.


So up next will be planning the new lid that will allow me to run my beer lines and air cooled tunnel.

Links to my other builds
Compubrew (Custom Brew Software I wrote)
Electric Brewery buildout
Bar Build

__________________
allen00se is offline
 
Quick reply to this message
Old 11-13-2012, 07:14 PM   #2
jedheuer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Sonoma, Ca
Posts: 32
Default

Hey allen00se,

Can you clarify the wiring you did here? I am using the same freezer and I am trying to hack into the wiring that runs into the stock controls there and connect it to my temp control. Indicating which wire are which would help me out as I am not to experienced with hacking appliances.

Thanks!

__________________
jedheuer is offline
 
Quick reply to this message
Old 11-14-2012, 04:12 AM   #3
dcarter
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2006
Posts: 384
Liked 23 Times on 20 Posts
Likes Given: 10

Default

That looks like a great build. It looks like you may be able to squeeze in another keg for a total of 4?

__________________
Primary:Sierra Nevada Pale Ale Clone

My trash heap fridge rescue and conversion to a first class fermentation chamber

If you don't like your job, you don't strike!.....You just go in everyday and do it really half a$$ed, THATS the American way! - Homer J Simpson
dcarter is offline
 
Quick reply to this message
Old 11-14-2012, 08:17 PM   #4
allen00se
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Tulsa, Oklahoma
Posts: 13
Default

Quote:
Originally Posted by jedheuer View Post
Hey allen00se,

Can you clarify the wiring you did here? I am using the same freezer and I am trying to hack into the wiring that runs into the stock controls there and connect it to my temp control. Indicating which wire are which would help me out as I am not to experienced with hacking appliances.

Thanks!
Ill check the wiring when I get home and report back what I did.
__________________
Keezer Build
Compubrew (Custom HERMES software I wrote)
WetBar Buildout
Electric HERMS Brew Build
allen00se is offline
 
Quick reply to this message
Old 11-14-2012, 08:18 PM   #5
allen00se
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Tulsa, Oklahoma
Posts: 13
Default

Quote:
Originally Posted by dcarter View Post
That looks like a great build. It looks like you may be able to squeeze in another keg for a total of 4?
Thanks, it is working out great, although I really doubt I could squeeze another keg in there. I will post some updated pics this weekend now that I have it in its final location with ducting and a fan to keep the lines cool to the taps
__________________
Keezer Build
Compubrew (Custom HERMES software I wrote)
WetBar Buildout
Electric HERMS Brew Build
allen00se is offline
 
Quick reply to this message
Old 11-15-2012, 11:26 PM   #6
inamays
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Charlotte, North Carolina
Posts: 41
Liked 4 Times on 4 Posts
Likes Given: 20

Default

I'm also interested in seeing your wiring diagram. Nice job!

__________________

Untappd: jmaysnc | Twitter: jmaysnc

inamays is offline
 
Quick reply to this message
Old 11-16-2012, 05:24 PM   #7
nickw85
Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Chicopee, MA
Posts: 69
Liked 7 Times on 6 Posts
Likes Given: 4

Default

MOre!

__________________
nickw85 is offline
 
Quick reply to this message
Old 11-19-2012, 07:20 PM   #8
allen00se
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Tulsa, Oklahoma
Posts: 13
Default

Quote:
Originally Posted by inamays View Post
I'm also interested in seeing your wiring diagram. Nice job!
Sorry I was slammed all weekend and didnt have time to reply. I also didnt have time to take new pics so I will try to explain using the old pics for now.

Please keep in mind that I am not an electrician and you should always consult an electrician before hacking any wiring, also I am sure there is potentially a way to fry your freezer and or your temp controller.


So here is the legend for the photo:
#1- Hot going from relay to status light/compressor
#2- Hot wire coming from outlet to relay
#3- ground
#4- junction for hot wire to status light/compressor
#5- junction for common to status light/compressor
A=Wire bundle going to your freezer compressor
B=Incoming wire bundle from your electrical outlet

In the above photo, what you are trying to accomplish is replacing the manual temp controller (where wires 1,2 and 3 are connected) with your new electronic temp controller. The way this freezer is setup makes it look more complicated than it really is because connections 4 and 5 are just jumpers to activate the green status light.

So the easiest version of rewiring would be to have your temp controller getting its own power, and all you would have to do is connect wires 1 and 2 to the your electronic temp controller on the terminals that are controlled by the relay (terminals 10 and 11).
For this tutorials purposes we will connect wire #2 to terminal #10 and wire #1 to terminal #11.






Now slightly more complicated would be using the freezers wiring to supply power to the temp controller. Wires 1 and 2 will still be in the same location since they are still used for the relay, but now you have to add a jumper wire that goes from terminal #10 to terminal #7. (This jumper wire will supply power to the temp controller and still power the relay). Then all you need to do is connect terminal #8 to your common wire (the white ones labeled #5 in my pic) and you should be good to go!
__________________
Keezer Build
Compubrew (Custom HERMES software I wrote)
WetBar Buildout
Electric HERMS Brew Build
allen00se is offline
 
Quick reply to this message
Old 11-20-2012, 05:42 PM   #9
jedheuer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Sonoma, Ca
Posts: 32
Default

awesome! thanks for taking the time to do this. I am going to hook it up this weekend.

__________________
jedheuer is offline
 
Quick reply to this message
Old 11-20-2012, 05:55 PM   #10
allen00se
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Tulsa, Oklahoma
Posts: 13
Default

Quote:
Originally Posted by jedheuer View Post
awesome! thanks for taking the time to do this. I am going to hook it up this weekend.
No Problem, I actually completely changed my wiring because of the way my keezer closet is laid out, but that should work for you. I ended up making my temp controller switch a wall outlet on and off and then I just plugged my keezer into that wall outlet. I really need to post some progress pics while I have some time over the holiday.
__________________
Keezer Build
Compubrew (Custom HERMES software I wrote)
WetBar Buildout
Electric HERMS Brew Build
allen00se is offline
 
Quick reply to this message
 



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The keezer build is finally finished! Keezer porn attached. GRHunter Kegerators and Keezers 21 08-31-2014 02:16 AM
Jersh's Keezer build... Keezer thread #1,493,829 Jersh Kegerators and Keezers 40 05-22-2014 01:19 PM
My 7.2 cu. ft. keezer build AZ_IPA Kegerators and Keezers 10 06-08-2011 06:12 AM
made some progress on my bar build/ keezer build 802VermontHomebrew Kegerators and Keezers 17 08-22-2010 02:20 PM
Keezer Build RBChallenger Kegerators and Keezers 4 03-02-2009 04:15 AM



Newest Threads

LATEST SPONSOR DEALS