Electric Brewing Supply 30A BCS Giveaway!

Home Brew Forums > Home Brewing Beer > Label Display & Discussion > Easiest labeling solution for relabeling?
LinkBack Thread Tools
Old 09-04-2008, 12:18 PM   #11
I like 'em shaved
Feedback Score: 0 reviews
bull8042's Avatar
Join Date: Jul 2008
Location: Fort Mill, SC
Posts: 10,279
Liked 445 Times on 443 Posts
Likes Given: 11


Originally Posted by kpellicone View Post
I think the easiest way for labeling bottles is to use the "milk" method. I print my labels to my work's color laser jet printer using standard paper and paste them with milk. Just cut your labels accordingly and with a pastry brush, or a bbq brush, slap some milk on the back and stick it right to the bottle. I have used the whole milk, not sure about skim, 2% etc... Works everytime ! Then when you are finished, just soak them in regular H2O and the labels come right off.
I have to agree here. My method was identical and the labels are perfectly adhered. The only deviance from this was that I just dunked the labels in a saucer and slapped them on then lightly rubbed from the center out to remove the extra "adhesive".
"I brew with a water cooler and some part from the toilet." - JohnnyO

"I do gravity feed the last gallon or two through my Therminator, but I expect you could suck start a Volkswagen before you could suck start one of these. - GilaMinumBeer

"..... Bull was right." - TXCurtis
bull8042 is offline
Reply With Quote Quick reply to this message
Old 09-04-2008, 01:06 PM   #12
Feedback Score: 0 reviews
EvilTOJ's Avatar
Join Date: Dec 2005
Location: Portland, OR, Oregon
Posts: 6,465
Liked 37 Times on 29 Posts
Likes Given: 3


If you go with the milk method, dehydrated milk works fine. Just add some water to get it thick in a plate, dip your labels, paste onto the bottle. Be aware that water will make ink-jet printing run unless it's treated.

That said, I use Avery #06103 3/4 inch white round labels and print designs onto them. Apply to bottlecaps, and voila! Remove the label as soon as you pop the top.


There is a very fine line between "hobby" and "mental illness."

EvilTOJ is offline
Reply With Quote Quick reply to this message
Old 09-04-2008, 01:33 PM   #13
Feedback Score: 0 reviews
Join Date: Mar 2008
Location: Utah
Posts: 548
Liked 2 Times on 1 Posts


i just use 1" circle laser printer labels. Print them off and stick them on each bottle cap after bottling. Much fast and more info than writing them by hand with a sharpie.


30 Gallons - Malty Moe APA

Bytor1100 is offline
Reply With Quote Quick reply to this message
Old 09-07-2008, 01:48 AM   #14
Feedback Score: 0 reviews
Join Date: Sep 2008
Location: Williamstown, MA
Posts: 425
Liked 3 Times on 3 Posts


Just the cap - on "flippy tops" you can tuck a small label in where it gets pinched by the down bail, or loop one over the bail and stick it to itself so it stays on, but is not glued to any part of the bottle and rips right off.

For giving away, if the need for a bigger label is felt (often isn't) a rubber band works, or if you don't expect the bottle back, glue on by any means you like.

I usually just note the date on the cap, and add an M for mead if it's mead, or a C for cider - otherwise it's beer - if I want details, I can look them up in my notes, assuming I can find those.

Bleachwater soaking helps if you are stuck scraping labels off.

Ecnerwal is offline
Reply With Quote Quick reply to this message
Old 09-07-2008, 01:47 PM   #15
Feedback Score: 0 reviews
Join Date: Nov 2007
Location: Christiansted, St Croix, USVI, US Virgin Islands
Posts: 3,921
Liked 127 Times on 95 Posts
Likes Given: 36


Milk is by far the simplest. Extremely dilute white Elmer's glue works well also.

I use some 'return-address' type labels because someone gave me a box of thousands. I think they're 0.75"x2.5" or something like that. First I print the info want. Then I just center 'em on the cap and push down on the ends. For flip-tops I use 'em like millstone wrote.

I don't use names on those labels; I use batch or gyle numbers which correspond to singular brews.




Fort Christian Brewpub
St Croix, US Virgin Islands

Bob is offline
Reply With Quote Quick reply to this message
Old 09-12-2008, 07:16 PM   #16
Feedback Score: 0 reviews
Grinder12000's Avatar
Join Date: Jul 2008
Location: Columbus WI
Posts: 2,949
Liked 35 Times on 31 Posts
Likes Given: 2


I put 4 labels onto a WORD doc and usign an printer printed one page.

Then took that page to Kinkos who copied 6 pages (about $1 each).

Cut out the labels and using a cheap paint brush brush the Milk onto the back.

The paper will curl but just put it on the bottle and hold the edges for a few seconds. Sticks like glue.

Ink does not run with wet hands with color copier paper.

Plus - my cat likes the process leftovers - he was feeling left out when I used the spent grains for Doggie Beer Bars.


Grinders Island Brewery - Pipeline

Bottled! Award winning East India Porter, Oatmeal Stout, Milk Stout, Saison fermenting at a nice controlled 85 degrees (up from 70) as it should be - weird isn't it.

Grinder12000 is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
De-labeling bottles Suddy Beginners Beer Brewing Forum 47 11-24-2009 11:25 PM
Labeling Bottles Ernie3 Beginners Beer Brewing Forum 8 12-13-2008 03:25 PM
Labeling Help mangine77 Label Display & Discussion 5 10-01-2008 01:20 AM
Labeling Carboys Gregg Meyer Extract Brewing 31 01-12-2007 03:02 PM
My 1st attempt @ labeling gp125racer Label Display & Discussion 2 08-19-2006 03:26 AM