Cool. These kegs are 13 gallon so the size of the keg is I believe skinnier but not sure. Ill be sure to get yo some dimensions soon. Thanks. cant seem to find any dimensions on the net for these kegs.
Smaller is better as I can just cut down a 15" to fit your keg.
Keep me posted
Cheers
Jay
__________________
Nor*Cal Brewing Solutions
-------------- and-------------
Redding Homebrew Store (530)243 BEER Need a false bottom for your Converted Keg, Kettle or Cooler??? Still have questions PM me here. http://www.norcalbrewingsolutions.com
I make a stand off like no other out there. What it does is gets the FB above the drain in the coolers. I make the FB in a way that it helps clear the wort and keep grain out of the spigot. The stand off is $15 when you buy a FB and no extra shipping.
Cheers
Jay
Do you or anyone else have pictures of this set up all put together?
I, for what ever reason, cannot post pictures since I became a vendor. I have e-mailed several times w/ little response and no help from the mods or TX. So I can't help there. I do however have several people that have bought this set up. 1 that is going to post picts and a small write up on the cooler and standoff system when they get to brew with it.
__________________
Nor*Cal Brewing Solutions
-------------- and-------------
Redding Homebrew Store (530)243 BEER Need a false bottom for your Converted Keg, Kettle or Cooler??? Still have questions PM me here. http://www.norcalbrewingsolutions.com
I do have 6 more 15" false bottoms built and ready to ship if anybody is in the market. I also still have several 12" that I can drill for a pickup tube or leave solid. Just a reminder the diptube assembly built to fit is only $22 with your FB order.
Cheers
Jay
The diptube assembly is $22 with, How about after the fact? Thought the one I had would work. But after seeing the quality of your FB's I would like to get the assembly also.
If anybody is in the market for one of these, Look no further. This is the best one i've seen. Thanks again.
Planning on pickup up a hinged 15" with dip tube in the future. Hoping someone can post up pics. I'm assuming the dip tube you sell will attach directly to a female 1/2" coupler? I plan on using this in my Electric BK once built.
jaybird, I got everything and looks really nice. I was wondering if the compression fitting was suppose to be tight. I set it up and tighten it down but still slides off the copper tube.
__________________
Fermenting: #54 Flanders Red 1.059 16 IBUS 12/22/11
#53 First sour 1.054 ~8 IBUs 12/15/11
I was having a similar "problem" as humann...but I filled up the MLT yesterday and it drained just fine so I wasn't concerned anymore
A little tricky figuring out the best way to put the FB in then the pick up tube, but once you get it it's no problem. FB is great quality and very heavy duty. Can't wait to put the sucker to work!
jaybird, I got everything and looks really nice. I was wondering if the compression fitting was suppose to be tight. I set it up and tighten it down but still slides off the copper tube.
I leave it loose so you can adjust length if needed then tighten it down. It will drain the kettle even if it slides a little. but you should be able to tighten it so it almost dostn't move.
Cheers
Jay
__________________
Nor*Cal Brewing Solutions
-------------- and-------------
Redding Homebrew Store (530)243 BEER Need a false bottom for your Converted Keg, Kettle or Cooler??? Still have questions PM me here. http://www.norcalbrewingsolutions.com
Either of you guys, Humann or Kilted, want to post pics?
Look at post #65 that is one of mine
Cheers
Jay
__________________
Nor*Cal Brewing Solutions
-------------- and-------------
Redding Homebrew Store (530)243 BEER Need a false bottom for your Converted Keg, Kettle or Cooler??? Still have questions PM me here. http://www.norcalbrewingsolutions.com
Linear Mode
