Newest Threads

**Kegcowboy** · 03-22-2011, 05:22 PM

More Options Here.
Announcement: We our temporarily out of our Peak 7 regulators – we will be using the flagship Tap-rite regulator which is also a large body, dual gauge regulator while we await the next shipment of Peak 7 regulators.

Dual Homebrew Stainless Steel Tower Kit: Dispense two beers at the same time from your choice of Pin-lock style or Ball-Lock style Cornelius Firestone Pepsi Coke Kegs.

Regulator: Our own High 69 CO2 Regulator incorporates the best features of the many other brands of regulators that we sell, but is offered at an affordable price. It has a new adjustment knob that allows pressure to be easily adjusted by hand (no tool required!). The shut-off valves are ball type check valves that prevent beer back-up into the regulator. Regulator has a maximum pressure safety system (blow off at 55 to 60 PSI.) The permanent seal at the inlet nipple provides enhanced protection of leaks and the O-ring setup on the tank side eliminates the need for fiber washers upon refill. Heavy duty dual gauges are protected by rubber gauge guards. The two-way gas manifold has check-valves that will maintain pressure regardless of your CO2 tank pressure level and will not allow for bleed through from attached kegs at higher pressures.

This double gauge regulator has one gauge to assist you in supplying the correct amount of pressure through the lines and a second gauge to let you know when it is time to trade the Co2 tank in for a full one. Believe us – nothing spoils the party quicker than running out of Co2 after the CO2 gas stores have closed.

Quick Disconnect Keg Couplers: Both the Ball Lock and Pin Lock keg couplers feature ¼ inch MFL connections that allow for easy swapping of the beverage and gas side for force carbonation through the dip tube or exchanging for a quick connect Sanke. This feature offers increased kit flexibility, is not typically included in other kits, and is one feature that many beer brewers consider valuable.

Tower: The 3” Diameter Draft Tower is completely made of chrome plated metal and does not feature any plastic parts that are commonly found in lower grade products. The two chrome plated (self-closing) faucets have brass levers and are each connected to 5’ length 3/16 ID hoses with either “quick connect” ball-lock or fixed pin-lock connectors depending on the customer’s preference. Mounting screws, gasket, and black ABS handles are included. Additionally, the tower has foam insulation to reduce sweating and assist in maintaining cold beer lines. The manufacturer of this tower has gone the extra mile to completely seam weld the flange rather than the more typical spot-weld. Towers are insulated with 1" thick foam to help maintain temperature all the way to the faucet!

Tower Specifications:

Material Stainless Steel

Hose Total of 6’ of clear 3/16 hose with hex coupling nuts

Dispensing System Insulated, air-cooled, 2-Keg

Keg Connectors Quick disconnect ball-lock or fixed pin-lock keg type

Height 12 “

Diameter 3” Tower, 4.5” Flange

(Optional -Priced without the tank shown - add the size that best suits you for $54 to $91 more) 5 Lb Aluminum CO2 Cylinder: Brand new tank manufactured in 2009. This tank will not need to be hydrostatically tested for 5 years. All of our CO2 cylinders are produced from high strength aluminum alloy 6061-T6. This particular tank is popular because it is not as heavy as a comparably sized steel tank and will not rust because of its corrosion resistant interior and exterior. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders have been independently tested over 100,000 cycles and are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a 1.125-12 UNF-2B male thread designed for use with CO2 Regulators. 2.5, 10, & 15 lb CO2 tanks are also available as an option.

Specifications:

Material Brushed Aluminum Cylinder/Brass Valve

Valve Threads CGA 320 with 1.125 Male Thread (Use with CO2 Regulator)

Weight (Empty) 7 lbs 8 oz

Capacity 5 Lbs (5 to 7 Kegs)

Height 18.25 “

Diameter 5.25”

**Kegcowboy** · 05-11-2011, 10:27 PM

Quote:

Originally Posted by Kegcowboy

More Options Here.
Announcement: We our temporarily out of our Peak 7 regulators – we will be using the flagship Tap-rite regulator which is also a large body, dual gauge regulator while we await the next shipment of Peak 7 regulators.

FYI PEAK 7 Regulators have replaced the regulator in the photo!
Dual Homebrew Stainless Steel Tower Kit: Dispense two beers at the same time from your choice of Pin-lock style or Ball-Lock style Cornelius Firestone Pepsi Coke Kegs.

Regulator: Our own High 69 CO2 Regulator incorporates the best features of the many other brands of regulators that we sell, but is offered at an affordable price. It has a new adjustment knob that allows pressure to be easily adjusted by hand (no tool required!). The shut-off valves are ball type check valves that prevent beer back-up into the regulator. Regulator has a maximum pressure safety system (blow off at 55 to 60 PSI.) The permanent seal at the inlet nipple provides enhanced protection of leaks and the O-ring setup on the tank side eliminates the need for fiber washers upon refill. Heavy duty dual gauges are protected by rubber gauge guards. The two-way gas manifold has check-valves that will maintain pressure regardless of your CO2 tank pressure level and will not allow for bleed through from attached kegs at higher pressures.

This double gauge regulator has one gauge to assist you in supplying the correct amount of pressure through the lines and a second gauge to let you know when it is time to trade the Co2 tank in for a full one. Believe us – nothing spoils the party quicker than running out of Co2 after the CO2 gas stores have closed.

Quick Disconnect Keg Couplers: Both the Ball Lock and Pin Lock keg couplers feature ¼ inch MFL connections that allow for easy swapping of the beverage and gas side for force carbonation through the dip tube or exchanging for a quick connect Sanke. This feature offers increased kit flexibility, is not typically included in other kits, and is one feature that many beer brewers consider valuable.

Tower: The 3” Diameter Draft Tower is completely made of chrome plated metal and does not feature any plastic parts that are commonly found in lower grade products. The two chrome plated (self-closing) faucets have brass levers and are each connected to 5’ length 3/16 ID hoses with either “quick connect” ball-lock or fixed pin-lock connectors depending on the customer’s preference. Mounting screws, gasket, and black ABS handles are included. Additionally, the tower has foam insulation to reduce sweating and assist in maintaining cold beer lines. The manufacturer of this tower has gone the extra mile to completely seam weld the flange rather than the more typical spot-weld. Towers are insulated with 1" thick foam to help maintain temperature all the way to the faucet!

Tower Specifications:

Material Stainless Steel

Hose Total of 6’ of clear 3/16 hose with hex coupling nuts

Dispensing System Insulated, air-cooled, 2-Keg

Keg Connectors Quick disconnect ball-lock or fixed pin-lock keg type

Height 12 “

Diameter 3” Tower, 4.5” Flange

(Optional -Priced without the tank shown - add the size that best suits you for $54 to $91 more) 5 Lb Aluminum CO2 Cylinder: Brand new tank manufactured in 2009. This tank will not need to be hydrostatically tested for 5 years. All of our CO2 cylinders are produced from high strength aluminum alloy 6061-T6. This particular tank is popular because it is not as heavy as a comparably sized steel tank and will not rust because of its corrosion resistant interior and exterior. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders have been independently tested over 100,000 cycles and are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a 1.125-12 UNF-2B male thread designed for use with CO2 Regulators. 2.5, 10, & 15 lb CO2 tanks are also available as an option.

Specifications:

Material Brushed Aluminum Cylinder/Brass Valve

Valve Threads CGA 320 with 1.125 Male Thread (Use with CO2 Regulator)

Weight (Empty) 7 lbs 8 oz

Capacity 5 Lbs (5 to 7 Kegs)

Height 18.25 “

Diameter 5.25”

FYI PEAK 7 Regulators have replaced the regulator in the photo!

**Kegcowboy** · 05-26-2011, 05:16 PM

5 days to request your coupon and use your coupon for additional saving on this kit

**Kegcowboy** · 06-02-2011, 04:17 AM

Thanks everyone....please send us photos of you and your friends drinking around the kegerator.

Cosper123 · 08-21-2011, 02:17 AM

Ouch, already up to 221 and the year isn't over yet. Bummed I missed out on this, looks like a great deal.

**Kegcowboy** · 08-21-2011, 11:44 AM

You are comparing the price above without a CO2 tank versus the price with a tank on the website that is why you see the big difference. Actually I checked the website this morning and the dual tower kegerator kit was less at $167. This of course is a mistake and I will fix it shortly as 1. it is the wrong price and 2. prices have increased this summer on several components which will affect the price slightly.

**Kegcowboy** · 08-22-2011, 01:02 PM

Price with current Football Season Savings coupon (search threads) is actually $168.15

**mrgstiffler** · 08-23-2011, 02:39 AM

Quote:

Originally Posted by Kegcowboy

Price with current Football Season Savings coupon (search threads) is actually $168.15

VERY tempting! I can't decide if I want to do the top tower or shanks out the front.

Cosper123 · 08-23-2011, 03:22 AM

Quote:

Originally Posted by Kegcowboy

You are comparing the price above without a CO2 tank versus the price with a tank on the website that is why you see the big difference. Actually I checked the website this morning and the dual tower kegerator kit was less at $167. This of course is a mistake and I will fix it shortly as 1. it is the wrong price and 2. prices have increased this summer on several components which will affect the price slightly.

That explains it, guess I need to read the fine print even when Co2 tank is pictured...

**Kegcowboy** · 08-23-2011, 08:59 AM

Quote:

Originally Posted by Cosper123

That explains it, guess I need to read the fine print even when Co2 tank is pictured...

Yes unfortunately we were getting hosed by the competition when we didn't show the whole kit (with tank) because people would look at our picture with tank and see $225 then they would look at the competition and see $199 and think it was cheaper when actually it was more (because you found out at the very end that the CO2 tank is not included) than ours. As you know at that point we don't get to reach through the screen and explain things to them. This is still a great price especially with the HBT coupon that anyone can request on the football season savings thread.

Anyway we have it set up so that when you are looking at our products on the website you know within the first couple of lines what is included and what is optional and what needs to be added and your kit price changes right in front of your eyes instead of having to go to another screen. We like this way better than what we had seen on other sites where they have all the options...............surprise........ at the end.

kegging kit