Dual Faucet SS Draft Beer Tower $99

**Kegcowboy** · 09-05-2010, 01:09 PM

Stainless Steel Draft Beer Tower: Dispense two beers at the same time. The 3” Diameter Draft Tower is completely made of stainless steel and does not feature any plastic parts that are commonly found in lower grade products. The two chrome plated faucets have brass levers and are each connected to 5’ length 3/16 ID beer hoses with hex coupling nuts. Mounting screws, gasket, and black ABS handles are included. Additionally, the tower has foam insulation to reduce sweating and assist in maintaining cold beer lines. The manufacturer of this tower has gone the extra mile to completely seam weld the flange rather than the more typical spot-weld. Upgrade to Perlick 425 ss, 525 ss, 575 ss, or stainless steel stout faucet and receive credit for the two standard faucets that are not used.

Buy/more details

Specifications:

Material Stainless Steel

Hose Total of 10’ of clear 3/16 hose with hex coupling nuts

Dispensing System Insulated, air-cooled, 2-Keg

Keg Connectors Common hex coupling nuts connect to coupler/tap

Height 12 “

Diameter 3” Tower, 4.5” Flange

**daugenet** · 09-09-2010, 07:40 PM

I got this unit from ya'll and love it. I upgraded to the 425ss faucets.

The only "issue" i experienced was that I had to cut off the connections so that I could fit the line down my 1/2 inch ID copper lines. I would have loved to left them on but that is just how it goes. :-)

As an "upgrade" you could offer to sell some insulated piping like what you find at home depot to put inside the tower. I took out the insulation provided and put the tubing around the individual lines. Everyone's setup will be different and I am not sure if it would be worth your time to offer something like this or not.

**Kegcowboy** · 09-11-2010, 01:56 AM

I would love to see more pictures

**bmckee56** · 09-11-2010, 01:31 PM

My taps are mounted on my gameroom wall and the refridgerator is on the other side of the wall. This looks like a fantastic deal, but I can't take you up on it, sorry.

Salute!

**Kegcowboy** · 09-11-2010, 02:50 PM

Perhaps you would be interested in this incredibly priced wall mounted drip tray at $69?

MORE DETAILS CLICK HERE

Brewphish · 12-20-2010, 06:36 PM

The tower doesn't appear to be in stock, do you expect to have them again soon?
Thanks!

**Kegcowboy** · 12-23-2010, 09:46 PM

They are in limited supply right now but we have 6 on the way next week and another 450 that will be delivered in January.

**Kegcowboy** · 03-12-2011, 04:52 PM

Quote:

Originally Posted by Brewphish

The tower doesn't appear to be in stock, do you expect to have them again soon?
Thanks!

The shipment has arrived we have 350 in stock

**Kegcowboy** · 04-04-2011, 04:53 PM

Quote:

Originally Posted by daugenet

I got this unit from ya'll and love it. I upgraded to the 425ss faucets.

The only "issue" i experienced was that I had to cut off the connections so that I could fit the line down my 1/2 inch ID copper lines. I would have loved to left them on but that is just how it goes. :-)

As an "upgrade" you could offer to sell some insulated piping like what you find at home depot to put inside the tower. I took out the insulation provided and put the tubing around the individual lines. Everyone's setup will be different and I am not sure if it would be worth your time to offer something like this or not.

We never really found a variety in any local options .....Maybe once the SC location is up and running ....we will revisit.

**Kegcowboy** · 06-03-2011, 04:49 PM

This would be agood one to send photos in for our upcoming catalog as well