7 Day sale while supplies last. Some might call this a 420 sale or a 4/20 sale because it is so close to the date that many 420 festivals occur and the price before applying a coupon happens to be $420, but it is just a coincidence........or is it?
Reply to this thread for our coupon code and you will save $70 on this particuliar kit compared to the normal price once the coupon is applied.
You get alot for this price and this is a great chance for those of you who are still bottling to build your own brewery or at least the kegging and dispensing side of things.
Here's what you get (CO2 cylinder sizes are optional so choose the size you want):
4 Keg Homebrew Faucet Kit (New) with Kegs (Refurbished): Dispense four beers at the same time from your choice of Pin-lock style or Ball-Lock style Cornelius Firestone Pepsi Coke Kegs. Also known as a freezorator or keezer kit that allows for freezer collar or through door installation. Get a large freezer combined with 2 of these kits and serve 8 different homebrews at a time!
Regulator: TapRite 742HP Regulator (not the cheap taprite you are used to seeing..not shown in photo but it is on our website) incorporates the best features of the many other brands of regulators that we sell, but is offered at an affordable price. It has a new adjustment knob that allows pressure to be easily adjusted by hand (no tool required!). The shut-off valves are ball type check valves that prevent beer back-up into regulator. Regulator has a maximum pressure safety system (blow off at 55 to 60 PSI.) The permanent seal at the inlet nipple provides enhanced protection of leaks and the O-ring setup on the tank side eliminates the need for fiber washers upon refill. Heavy duty dual gauges are protected by rubber gauge guards. The two-way gas manifold has check-valves that will maintain pressure regardless of your CO2 tank pressure level and will not allow for bleed through from attached kegs at higher pressures.
This double gauge regulator has one gauge to assist you in supplying the correct amount of pressure through the lines and a second gauge to let you know when it is time to trade the Co2 tank in for a full one. Believe us – nothing spoils the party quicker than running out of Co2 after the CO2 gas stores have closed.
Quick Disconnect Keg Couplers: Both the Ball Lock and Pin Lock keg couplers feature ¼ inch MFL connections that allow for easy swapping of the beverage and gas side for force carbonation through the dip tube or exchanging for a quick connect Sanke. This feature offers increased kit flexibility, is not typically included in other kits, and is one feature that many beer brewers consider valuable.
Kegs: These are re-conditioned 5 Gallon Ball Lock, Pepsi Style, Soda Kegs (please indicate if Pin Lock, Coke Style kegs are desired). The kegs have been cleaned and soaked in a hot cleaning solution, re-rinsed, lubed and re-pressurized to check the seals. The kegs are in good shape, but could have small dings, dents or scratches. These will not affect the function of the kegs. Many have stickers on the outside. They might be of either Cornelius, Firestone (also called Spartenburg) or Italian construction.
5-1/8" Shank with Faucet Assembly: We could have gone with something shorter and cheaper but we wanted to ensure that you could accommodate wide refrigerator doors and freezer collars. You’ll enjoy the extra room to work with regardless of the span of your barrier.
Chrome Plated Faucet with Brass Lever: Attractive and easy to clean chrome finish. The Brass Lever is made to last and will accommodate custom tap handles.
Black ABS plastic Faucet Knob: This is just to get you started. You will probably want to customize the faucet with your favorite tap handle.
Shank Specifications:
Material Chrome Plated Brass
Bore I.D. ¼”
Thread 7/8”-14(5/8” BSP)
Overall Length 5-1/8 “
Lager/Ale Faucet Specifications:
Body Material Chrome Plated Forged Brass
Bonnet and Collar Chrome Plated Brass
Body Threads 1-1/8” Thread (Industry Standard USA)
Brass Lever Thread 3/8”-16(Unified Coarse Thread)
5 Lb Aluminum CO2 Cylinder: Brand new tank manufactured in 2009. This tank will not need to be hydrostatically tested for 5 years. All of our CO2 cylinders are produced from high strength aluminum alloy 6061-T6. This particular tank is popular because it is not as heavy as a comparably sized steel tank and will not rust because of its corrosion resistant interior and exterior. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders have been independently tested over 100,000 cycles and are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a 1.125-12 UNF-2B male thread designed for use with CO2 Regulators. 2.5, 10, & 15 lb CO2 tanks are also available as an option.
Specifications:
Material Brushed Aluminum Cylinder/Brass Valve
Valve Threads CGA 320 with 1.125 Male Thread (Use with CO2 Regulator)
Weight (Empty) 7 lbs 8 oz
Capacity 5 Lbs (5 to 7 Kegs)
Height 18.25 “
Diameter 5.25”
$70 Off 4-Faucet Kit with Kegs
Linear Mode
.gif-1367621329.gif)
