10 # Aluminum CO2 Tank $75

**Kegcowboy** · 08-11-2010, 02:19 PM

10 Lb Aluminum CO2 Cylinder -Free Carrying Handle if ordered before 8/16

Brand new tank manufactured in the last few months. This tank will not need to be hydrostatically tested for 5 years. All of our CO2 cylinders are produced from high strength aluminum alloy 6061-T6. This particular tank is popular because it is not as heavy as a comparably sized steel tank and will not rust because of its corrosion resistant interior and exterior. The service pressure is up to 1800 PSI/124 BAR with a minimum test pressure of 3000 PSI/207 BAR. These cylinders have been independently tested over 100,000 cycles and are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a 1.125-12 UNF-2B male thread designed for use with Co2 Regulators.

Specifications:
Material Brushed Aluminum Cylinder/Brass Valve
Valve Threads CGA 320 with 1.125 Male Thread (Use with CO2 Regulator)
Weight (Empty) 14 lbs 3 oz
Capacity 10 Lbs (10 to 12 Kegs)
Height 19.75 “
Diameter 6.75”

Only 12 Left!

**jvino** · 08-11-2010, 03:03 PM

Looks like your website is having issues??

**daugenet** · 08-11-2010, 03:47 PM

I think you meant to link this

**Kegcowboy** · 08-12-2010, 01:41 AM

Yes sorry about that - the website was down for half the day. We had 5 lucky customers who were able to get the tank for a $40 discount this afternoon though. We have seven left at this special price. You can always call and ask for Brad Sunnes at 281-888-0507 if there happens to be any down time on the site and he will do an over the phone order.

**jvino** · 08-12-2010, 01:53 AM

I was going to get a 2 keg sankey kit but noticed that you don't have and regs that support two different pressure settings. Is that available?? Something like:

http://stores.kegconnection.com/Detail.bok?no=334

I like supporting vendors of HBT whenever possible!! Thanks

**Kegcowboy** · 08-12-2010, 02:21 AM

Well sorta - we have what I believe to be the lowest priced dual gauge regulators with a hand adjustment and when you consider the chrome finish, gauge guards, styling, built in O-ring it is easy to see the value. What we have been doing is letting customers gang them together themselves with a connector we provide for $2 when they buy two regulators ($36 each) which we think is a great deal considering what is involved.

**Kegcowboy** · 10-21-2010, 08:55 PM

10# Tanks are back in stock - limited supply (they don't last long at this price)

Rhoobarb · 10-21-2010, 09:12 PM

What about the dual gauge regulators? I have a buddy looking for one and didn't see them on your site.

**daugenet** · 10-21-2010, 09:31 PM

Quote:

Originally Posted by Kegcowboy

Well sorta - we have what I believe to be the lowest priced dual gauge regulators with a hand adjustment and when you consider the chrome finish, gauge guards, styling, built in O-ring it is easy to see the value. What we have been doing is letting customers gang them together themselves with a connector we provide for $2 when they buy two regulators ($36 each) which we think is a great deal considering what is involved.

I have this regulator and it works quite well. I recommended it to one of my friends should he get into kegging

**Kegcowboy** · 10-27-2010, 03:55 AM

Thanks - The good news is that our Peak 7 regulators will be back in stock next week. We have repositioned the pressure release valve so that it is located between the two gauges.