Spike Brewing 12.5 Conical Fermenter Giveaway - Enter Now!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > When do you read the alcohol by volume

Reply
 
LinkBack Thread Tools
Old 10-29-2007, 08:19 PM   #1
mooseface
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Posts: 19
Default When do you read the alcohol by volume

I'm still not grasping this, sorry. At what point do you get your reading for alcohol? I have transfered to the secondary and my sample was still high, FG should be 1.007 - 1.010 and I am at 1.014. My alcohol by Volume target on the recipe is 4.0% - 4.5%, that means I'm only at about 2% right?

__________________
mooseface is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 08:22 PM   #2
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,651
Liked 133 Times on 126 Posts

Default

No, ABV is based on the difference between the starting gravity and the finishing gravity. The final gravity tells you how much of the sugar didn't ferment.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 08:28 PM   #3
mooseface
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Posts: 19
Default

Oh, good grief. Thank You. So, I just need to attempt to hit my final gravity and I should be OK. How close is close enough in a case like this?

__________________
mooseface is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 08:32 PM   #4
Evan!
Feedback Score: 0 reviews
 
Evan!'s Avatar
Recipes 
 
Join Date: Aug 2006
Location: Charlottesville, VA
Posts: 11,901
Liked 69 Times on 61 Posts
Likes Given: 1

Default

close enough is whatever you end up with...if it's off by 5 or 10 points, what are you gonna do? I've got a double IPA in bottle right now that finished at 1.038. I tried everything I could (short of beano, which I refuse to use) to get it lower, but it wouldn't budge. So I just let it be, and it tastes great. Of course, it's hopped to the gills, but regardless...

It's rare that any of my beers will drop below 1.012...even though I oxygenate the hell out of my beer. I wouldn't be concerned with 1.014 or 1.012.

__________________
MOSS HOLLOW BREWING CO.
Aristocratic Ales, Lascivious Lagers


.planned:
•Scottish 80/- •Sweet Stout •Roggenbier
.primary | bright:
98: Moss Hollow Soured '09 72: Oude Kriek 99: B-Weisse 102: Brett'd BDSA 104: Feat of Strength Helles Bock 105: Merkin Brown
.on tap | kegged:
XX: Moss Hollow Springs Sparkling Water 95: Gott Mit Uns German Pils 91b: Brown Willie's Oaked Abbey Ale 103: Merkin Stout
98: Yorkshire Special 100: Maple Porter 89: Cidre Saison 101: Steffiweizen '09 (#3)
Evan! is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 08:38 PM   #5
mooseface
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Posts: 19
Default

Thanks! Everyone is so helpful! I can't thank you all enough, this is so fun!

__________________
mooseface is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 08:45 PM   #6
homebrewer_99
Feedback Score: 0 reviews
 
homebrewer_99's Avatar
Recipes 
 
Join Date: Feb 2005
Location: Atkinson (near the Quad Cities), IL
Posts: 17,951
Liked 82 Times on 72 Posts
Likes Given: 1

Default

You need the OG and FG to determine the alcohol content. Many yeasts attenuate at approximately 75%.

When I brew and take my notes I record the OG reading and divide the OG by 4, example:

OG: 1.050 / 4 - 12.5 (use the last 2 numbers only).

This tells me at a glance that my FG should be in the neighborhood of 1.012.

When I take gravity readings I look for the projected FG. If it's still over I give it more time in the primary. I never rack to the secondary if it hasn't hit the FG or is really close like at 13. This way I know the fermentation is complete.

Racking to a secondary is for clearing, aging and mellowing.

__________________
HB Bill
homebrewer_99 is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 09:24 PM   #7
mooseface
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Posts: 19
Default

I'm such a newbie...well, sounds like I should avoid waiting out the secondary and just go ahead and bottle it? At this point I'm not doing myself or the beer any good am I? It's my very first batch, I don't think I need to attempt to clear or mellow anything yet, or do I?

__________________
mooseface is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 09:31 PM   #8
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Upper Michigan
Posts: 60,707
Liked 4364 Times on 3173 Posts
Likes Given: 848

Default

Well, it's not always just about being clearer. It will taste better, too, whether you leave it for another week or two in the primary or move it to the clearing tank. Young beer tastes ok, but like young beer. Mature beer tastes, well, finished. Better and smoother and cleaner and clearer.

But it's so hard to wait for that! If you wait to bottle, you'll have less sediment in your bottles when you pour. It'll be a cleaner tasting beer without a yeasty bite. It'll be really good. If you bottle sooner (but still after it's done fermenting), it'll be drinkable.

Oh, yeah, to estimate your ABV:

(OG-FG) X .131= approx ABV.

So, say your og was 1.040 and your fg was 1.015 (just to make the math easier for me):

(1.040- 1.015) X.131
25 X .131= 3.28% ABV

__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006
Yooper is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 09:49 PM   #9
mooseface
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Posts: 19
Default

Excellent information. It's in there already, I guess I will let it be for a while. Thanks everyone for the helpful conversions, clears things up a bit.

__________________
mooseface is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2007, 10:11 PM   #10
BierMuncher
...My Junk is Ugly...
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
BierMuncher's Avatar
Recipes 
 
Join Date: Jan 2007
Location: St. Louis, MO
Posts: 12,159
Liked 578 Times on 340 Posts
Likes Given: 209

Default

This is a starting gravity of 1.056.

hydrometer.jpg

When the beer continues to ferment, the liquid becomes "thinner" because of the increase in alcohol concentration. That will make this hydrometer sink to a lower number. This one ended around 1.015 for a 5.4% beer.

Once you've hit that final number and the hydrometer remains static for three days, then you can assume your fermentation is complete. Then follow Yoop's calc's below to determine the ABV%.

__________________

*******
Check Out My Rolling Kegerator

BierMuncher Tried & Trues:
Tits-Up IIPA (3-Time Medalist), Black Pearl Porter, Kona Pale Ale, Outer Limits IPA, Centennial Blonde (4.0%), Nierra Sevada (SNPA), SWMBO Slayer Belgian Blonde,

BierMuncher is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Alcohol by volume too low! NE-Brewer General Techniques 7 07-26-2009 12:07 AM
potential alcohol by volume? Kershner_Ale General Beer Discussion 1 05-10-2009 07:25 AM
Alcohol % by volume question Mesa512 Beginners Beer Brewing Forum 13 03-14-2009 05:36 PM
Low Alcohol Volume? WriterWriter Beginners Beer Brewing Forum 1 02-22-2009 09:34 PM
Less Volume ... Less Alcohol chefchris General Beer Discussion 4 09-13-2008 11:45 PM