New Giveaway - Wort Monster Conical Fermeneter!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Varying levels of carbonation...




Reply
 
LinkBack Thread Tools Display Modes
Old 01-04-2013, 02:11 AM   #1
bfinleyui
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Posts: 326
Liked 13 Times on 13 Posts
Likes Given: 44

Default Varying levels of carbonation...

So I've got a beer that I've had a few bottles of now, after spending about two and a half weeks in bottles. The first bottle I had was great. Perfect carb level.

The next two, however, were virtually flat. I'm guessing that means I didn't mix the bottling bucket well enough. I had previously just put the priming sugar solution in the bottom of my bucket, racked on top of it, and it mixed well enough.

What I'm asking now... Is there anything i can do to save it? or at least know ahead of time which bottles are screwed and which are good to drink?

I'm afraid to add carb drops, in case that'd create bottle bombs, but I'm also not really interested in drinking flat beer...



__________________
Primary:
Bottled: Cinnamon Apple Cider, Two Hearted Clone, FW Double Jack Clone
Kegged: Kent's Hollow Leg
Conditioning: Russian Imperial Stout, Milk Chocolate Porter/Stout Partigyle
On Deck: Graff, DIPA w/Heady Topper Yeast
bfinleyui is offline
 
Reply With Quote Quick reply to this message
Old 01-04-2013, 02:20 AM   #2
Revvy
Post Hoc Ergo Propter Hoc
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,784
Liked 2657 Times on 1602 Posts
Likes Given: 3446

Default

You can wait another week or more for all the bottles to come up to speed. 2.5 weeks is NOT three weeks, and three weeks when at 70 degrees is the minimum number of weeks it usually takes for average gravity beers to carb and condition.

It's really just because they're just on the cusp of being ready.

Inconsistant carbonation, usually simply means that they are not ready yet. If you had opened them a week later, or even two, you never would have noticed. Each one is it's own little microcosm, and although generally the should come up at the same time, it's not an automatic switch, and they all pop on.

A tiny difference in temps between bottles in storage can affect the yeasties, speed them up or slow them down. Like if you store them in a closet against a warm wall, the beers closest to the heat source may be a tad warmer than those further way, so thy may carb/condition at slightly different rates. I usually store a batch in 2 seperate locations in my loft 1 case in my bedroom which is a little warmer, and the other in the closet in the lving room, which being in a larger space is a tad cooler, at least according to the thermostat next to that closet. It can be 5-10 degrees warmer in my bedroom. So I usually start with that case at three weeks. Giving the other half a little more time.


The three weeks we talk about is usually just the minimum. Many beers take longer. If you had given them another week, more than likely you never would have noticed.

Just give them more time. They're not carbed yet, because they're not ready yet.

The 3 weeks at 70 degrees, that we recommend is the minimum time it takes for average gravity beers to carbonate and condition. Higher grav beers take longer.

Temp and gravity are the two most important factors as to how long it will take.

Stouts and porters have taken me between 6 and 8 weeks to carb up..I have a 1.090 Belgian strong that took three months to carb up.

And just because a beer is carbed doesn't mean it still doesn't taste like a$$ and need more time for the off flavors to condition out.

Everything you need to know about carbing and conditioning, can be found here Of Patience and Bottle Conditioning. With emphasis on the word, "patience."

Carbonation is actually foolproof, you add sugar, the yeast eats it and farts co2 which carbs the beer. It's not a complex system, and there's very little that can go wrong...It just takes time.....

There really is no other answer than patience, because there really isn't a problem. It really is a simply and fool proof process. The problem arises that we try to govern the behavior based on our timeframe, and not the yeast's. They don't read calendars or instruction sheets, they just do their own thing in however long it takes them.

I've been doing this for years, and bottled nearly a thousand gallons of beer, and have never had one that didn't carb eventually. And I don't do anything special to them at bottling day, that isn't explained in my bottling sticky. You just gotta wait.

__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is online now
2
People Like This 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Carbonation Levels Kegging - Need Help wbeeson23 Bottling/Kegging 4 12-21-2011 02:31 PM
Carbonation levels too low, not enough psi? reif.erik Bottling/Kegging 4 05-15-2008 10:49 PM
Varying Carbonation Levels Austin_ Beginners Beer Brewing Forum 4 04-19-2008 03:22 AM
Carbonation Levels Brew_Meister Bottling/Kegging 5 02-16-2006 07:03 PM
Carbonation Levels Ochre Beginners Beer Brewing Forum 4 10-23-2005 04:47 PM