Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Setting Up to Eventually Upgrade to All Grain
Reply
 
LinkBack Thread Tools
Old 01-16-2013, 04:21 AM   #1
Leighton
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 12
Liked 1 Times on 1 Posts
Likes Given: 1

Default Setting Up to Eventually Upgrade to All Grain

I'm building my initial set up to easily upgrade from extract to all grain, but I have a couple of questions. First of all, I've been told that if I plan to eventually brew 10 gallon batches that I should buy a 20 gallon pot to leave room for high gravity beers such as barley wines. I also need to worry about having a strike/sparge pot that is big enough to work with that.

So, I'm thinking about making my first kettle a reasonable priced 15 gallon, that I can upgrade to a nice 20 gallon once I'm comfortable. Does that seem reasonable?

Also, is a second burner something I will need when I eventually upgrade?

Thanks for the help.

__________________
Leighton is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 05:47 AM   #2
45_70sharps
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Raymond, Washington
Posts: 1,804
Liked 172 Times on 141 Posts
Likes Given: 136

Default

Well a big beer doesn't need a big boil kettle, but you could be looking at some boils being 90 minutes and with the boil off you need extra room, plus you want to have a bigger batch than what you want so that you leave some with the yeast cake, then you need room to boil without a mess.
20 gallons would be the best bet.
15 should work though for a while.
It's certainly good enough for getting the strike water going and for sparge water.

I would like to upgrade to 10 gallons some day. Just lots of money between here and there.

Are you planning on direct firing the mash or a mash tun like the coleman?
I don't know what you would use for an insulated cooler for a mash tun for 10 gallon batches of anything but low gravity beers so probably direct fire and then a second burner.
You are doing it right though. Buy equipment that works for when you upgrade later.
If you start with a large pot, you can use it in the future and in the mean time you can figure out exactly what you want your system to be so you can buy the appropriate gear to get there.

__________________

Let's see if I keep this updated!

On tap
Black Butte clone

In secondary
Pumpkin ale

In primary
Honey wit

Up next.. Firestone Union Jack clone

45_70sharps is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 02:24 PM   #3
Leighton
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 12
Liked 1 Times on 1 Posts
Likes Given: 1

Default

You don't think a 10 gallon cooler would work as a mash tun for a brew that size? That's what I was planning on doing. Maybe I should just go with a 15 gallon and plan to just stick with five gallons if I'm going high gravity.

Would a 10 gallon pot be big enough for a strike/sparge if my brew kettle was 15 gallons?

__________________
Leighton is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 03:21 PM   #4
TopherM
Vinz Clortho - the Keymaster of Gozer the Gozerian
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
TopherM's Avatar
Recipes 
 
Join Date: Mar 2011
Location: St. Petersburg, FL
Posts: 3,826
Liked 410 Times on 324 Posts
Likes Given: 21

Default

I brew 10 gallon batches in a 15.5 gallon keggle. I've done a few barleywines, and might not be able to go 10 gallons in the 15.5 gallon pot, but I can easily do 8-8.5 gallon batches. Nothing says you HAVE to do 5/10/15 gallon batches, everything is divisible. You can always just make up the volume post-mash in the sparge water as well, if you really have to have 10.0 gallons, no biggie.

The reason I would NOT buy a 20 gallon kettle is that is is difficult to work with 5 gallon batches in that large of a kettle, IMO. If more than 50% of your batches are going to be 10+ gallons, a 20 gallon kettle would make sense, but about 75% of my batches are 5 gallons, and I only do about 5-6 larger batches a year.

I have both a 15.5 gallon keggle and a 11 gallon Bayou Classic pot, and have never run into any issues with producing 10 gallon batches. I also only have one set of fittings, and just swap fittings out between the two kettles.

__________________

Primary #1 - Oktoberfest
Primary #2 - Chamomile Honey Wheat
Primary #3 - EMPTY!
Secondary #1 - Downtown Flanders Brown (brewed August 2012)
Keg #1 - Coffee Vanilla Stout
Keg #2 - Fall of the Ukraine Baltic Porter (lagering in keg)
Keg #3 - EMPTY!
Bottled - NONE!

TopherM is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 04:00 PM   #5
grathan
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2010
Location: Albany, NY
Posts: 1,768
Liked 106 Times on 79 Posts
Likes Given: 55

Default

If you gonna make a barley wine just get what you can with the grain and add a couple lbs of dme.

__________________
grathan is online now
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 04:11 PM   #6
Leighton
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 12
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by TopherM View Post
I brew 10 gallon batches in a 15.5 gallon keggle. I've done a few barleywines, and might not be able to go 10 gallons in the 15.5 gallon pot, but I can easily do 8-8.5 gallon batches. Nothing says you HAVE to do 5/10/15 gallon batches, everything is divisible. You can always just make up the volume post-mash in the sparge water as well, if you really have to have 10.0 gallons, no biggie.

The reason I would NOT buy a 20 gallon kettle is that is is difficult to work with 5 gallon batches in that large of a kettle, IMO. If more than 50% of your batches are going to be 10+ gallons, a 20 gallon kettle would make sense, but about 75% of my batches are 5 gallons, and I only do about 5-6 larger batches a year.

I have both a 15.5 gallon keggle and a 11 gallon Bayou Classic pot, and have never run into any issues with producing 10 gallon batches. I also only have one set of fittings, and just swap fittings out between the two kettles.
This is the information I've been wanting to hear. Thank you.

So you think if I start with a 10 gallon economy kettle, and when I upgrade to 15 I can turn that in my sparge pot without an issue?
__________________
Leighton is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 04:14 PM   #7
slarkin712
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
slarkin712's Avatar
Recipes 
 
Join Date: Sep 2011
Location: St. Louis, MO
Posts: 711
Liked 43 Times on 39 Posts
Likes Given: 6

Default

I boil 5.5 and 11 gallon batches in my 20 gallon boilermaker and it works fine for me. Even when I do 11 gallon batches there is almost no chance of a boilover. For 10 gallon batches, I'd suggest a 15 gallon mash tun. For 10 gallon batches anything over OG 1.060 there might not be enough room in a 10 gallon mash tun.

__________________
slarkin712 is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 04:39 PM   #8
TopherM
Vinz Clortho - the Keymaster of Gozer the Gozerian
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
TopherM's Avatar
Recipes 
 
Join Date: Mar 2011
Location: St. Petersburg, FL
Posts: 3,826
Liked 410 Times on 324 Posts
Likes Given: 21

Default

Quote:
So you think if I start with a 10 gallon economy kettle, and when I upgrade to 15 I can turn that in my sparge pot without an issue?
Yes, this is the route I think most people take. As long as you aren't concerned about the aesthetics of the pots being mismatched, you're good. They will be 100% funtional in those roles.
__________________

Primary #1 - Oktoberfest
Primary #2 - Chamomile Honey Wheat
Primary #3 - EMPTY!
Secondary #1 - Downtown Flanders Brown (brewed August 2012)
Keg #1 - Coffee Vanilla Stout
Keg #2 - Fall of the Ukraine Baltic Porter (lagering in keg)
Keg #3 - EMPTY!
Bottled - NONE!

TopherM is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 06:02 PM   #9
Leighton
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 12
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by TopherM View Post
Yes, this is the route I think most people take. As long as you aren't concerned about the aesthetics of the pots being mismatched, you're good. They will be 100% funtional in those roles.
I just wanted to make sure that I would have enough room in a 10 gallon pot to work with the 15. Usually aesthetic issues like that bother the hell out of me, but I don't think it will in this case.
__________________
Leighton is offline
 
Reply With Quote Quick reply to this message
Old 01-16-2013, 06:58 PM   #10
TopherM
Vinz Clortho - the Keymaster of Gozer the Gozerian
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
TopherM's Avatar
Recipes 
 
Join Date: Mar 2011
Location: St. Petersburg, FL
Posts: 3,826
Liked 410 Times on 324 Posts
Likes Given: 21

Default

Quote:
Usually aesthetic issues like that bother the hell out of me, but I don't think it will in this case.
I think most people go this route, then their next big upgrade is matching the pots to get the bling factor Doesn't bother me, though, I've used the same mismatched pots for two years !!

Good luck!
__________________

Primary #1 - Oktoberfest
Primary #2 - Chamomile Honey Wheat
Primary #3 - EMPTY!
Secondary #1 - Downtown Flanders Brown (brewed August 2012)
Keg #1 - Coffee Vanilla Stout
Keg #2 - Fall of the Ukraine Baltic Porter (lagering in keg)
Keg #3 - EMPTY!
Bottled - NONE!

TopherM is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting up brewing from grain Drayman General Beer Discussion 24 07-16-2012 08:35 AM
Grain mill roller gap setting? What should I use? Jayhem All Grain & Partial Mash Brewing 5 03-09-2012 07:09 PM
Setting my Grain Mill Rockweezy All Grain & Partial Mash Brewing 1 04-17-2011 02:05 AM
Setting my Grain Mill Rockweezy All Grain & Partial Mash Brewing 1 04-17-2011 01:15 AM
Grain Crush Setting houge04 All Grain & Partial Mash Brewing 2 11-10-2010 09:43 AM