Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Serious Problems with a brew NEED HELP!!
Reply
 
LinkBack Thread Tools
Old 08-19-2008, 04:41 PM   #1
fdbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Posts: 8
Default Serious Problems with a brew NEED HELP!!

Hello everyone. In case you wont figure it out, I am a very new home brewer. I bought a basic kit which has a glass carboy and a plastic bucket. All other accessories needed to brew.

I have brewed a couple of batches of the pre-measured kits and they turned out pretty good.

Recently I tried to branch off on my own with a buddy of mine who is in on all this with me. We wanted to try a chocolate brew, which I was turned on to by a doctor who I run into on occasion at work. Havnt seen him since I tried to brew this brew.

But I intended on making a nut brown ale with some chocolate flavor. I was told by this doctor to buy the ground baking cocoa and add it during the boil phase of the mash. The entire canister.

Well I went through and did that. I finished the fermentation, which didnt seem to ferment that much, but I did everything I normally would and primed it with 3/4 cup of priming sugar and bottled.

Well about a week after I bottled this brew. I came Home to find glass all over my basement and glass embedded into my ceiling....not exaggerating. So immediately I emptied all the bottled which were extremely pressurized.

I would like to try to make this brew again but without the worry of making homemade time bombs. So if anyone has any advice they could lend on where I went wrong I would deeply appreciate it. I think it has to do with the amount of priming sugar I used. But I cant find anywhere how much I should use, or how to avoid this problem from happening again. Thanks everyone.

__________________
fdbrewer is offline
 
Reply With Quote Quick reply to this message
Old 08-19-2008, 04:45 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,286
Liked 1079 Times on 716 Posts
Likes Given: 28

Default

Yeah, buy a hydrometer and use it to gauge how far fermentation has progressed. Don't bottle until you get at least 75% attenuation and note no change over about a week. Leave your brews in primary for 10-14 days minimum before bottling, or preferably up to 4 weeks.

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 08-19-2008, 04:45 PM   #3
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,805
Liked 2777 Times on 1661 Posts
Likes Given: 3489

Default

Did you take a hydrometer reading before you went and bottled? Was the reading unchanged for 3 days?

Most likely you weren't finished fermenting all that sugar before you bottled, then adding priming sugar made for a bottle bomb situation..

Your hydrometer is how the beer talks to you...A lot of us leave the beer in primary for 3-4 weeks before bottling...this pretty much ensures fermentation is complete and allows the yeast to clean up for themselves...

__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Old 08-19-2008, 04:46 PM   #4
ShortSnoutBrewing
Kwanesum Chinook Illahee
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
ShortSnoutBrewing's Avatar
Recipes 
 
Join Date: Oct 2007
Location: Portland, OR
Posts: 3,266
Liked 12 Times on 11 Posts
Likes Given: 1

Default

I'm going to take a guess and say you bottled after 4 - 7 days. Is that right? If so you really should let the beer sit in primary for at least 14 days if not longer. But more importantly you should be taking hydrometer readings to see if the yeast are truly done doing their job and that it's ready for bottling.

ShortSnoutBrewing is offline
 
Reply With Quote Quick reply to this message
Old 08-19-2008, 04:52 PM   #5
Chriso
Broken Robot Brewing Co.
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Chriso's Avatar
Recipes 
 
Join Date: Oct 2007
Location: Someplace, Nebraska
Posts: 4,718
Liked 72 Times on 63 Posts
Likes Given: 129

Default

It sounds to me like what is actually occuring during fermentation is still "a mystery to you". Understanding what changes are taking place can help you to interpret and address your beer's condition at any given time.

Above is good advice re: hydrometers and time in the primary. You should also read or re-read Palmer's How To Brew because it helps you to develop an understanding of the changes that are occurring - or in the case of your chocolate beer - not occurring.

My bet is you had a stuck ferment, that could've been solved by gently swirling the beer in the fermenter and leaving it for another 1-2 weeks.

Also, I'd recommend posting your thread in the correct forum next time - this one is for bugs related to the forum software. This thread is best located in the Beginners' Forum or in the General Techniques forum.

Cheers and thanks for sharing your story. Hope our advice helps a little. With some patience and studying, you'll be making non-explosive good beer in no time flat. Good luck mate!

__________________
BROKEN ROBOT BREWING CO.

Chriso || SMaSH Brewers, Unite! || Nebraska Brewers! || Lincoln Lagers Brew Club
"You have just experienced the paradigm shift that is....all grain brewing." - BierMuncher
Chriso is offline
 
Reply With Quote Quick reply to this message
Old 08-19-2008, 05:03 PM   #6
fdbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Posts: 8
Default

Sorry for the wrong post! But I will make sure that I will get it in the right spot next time. But thank you all for the great responses and advice! I will give it a shot again and really pay attention to my tools! Thanks again all!

__________________
fdbrewer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Excellent Brew Day - 2 problems BarnabyHooge General Techniques 2 08-02-2009 01:36 PM
Many problems with first brew..How to tell if it is ok? Tiako Beginners Beer Brewing Forum 23 02-09-2009 01:21 AM
First time brew problems billk911 Beginners Beer Brewing Forum 3 01-20-2009 04:31 AM
Problems with my first brew Ratphink120 Beginners Beer Brewing Forum 1 10-29-2008 06:51 AM
First brew problems brewerik Beginners Beer Brewing Forum 4 10-10-2006 04:10 PM



Newest Threads

LATEST SPONSOR DEALS