Second addition of hops at "zero"?

ChefBrew · 10-19-2008, 04:28 AM

So my next batch of beer is a trappist ale. This is a big step I think. The question I have is that there are two hop additions: one at the beggining, or 60 min., and one at 0 min. What can "zero" mean? What do I do?

**Brooklyn-Brewtality** · 10-19-2008, 04:30 AM

a "0 minute" hop addition, is also known as a "flame out" hop addition. add that amount of hops right when you turn off the burner, and leave them in while cooling

**Grinder12000** · 10-19-2008, 08:06 PM

Also you will come across "dry hopping" and then "hopback".

I
ve never done anything with dry hopping but this is where you add the hops AFTER you have carboyed it and I BELIEVE after fermentation (someone will correct me if I'm wrong).

Hopbacking is where you more or less siphon your wort over leaf hops and that wort goes into another vessle.

ChefBrew · 10-25-2008, 04:14 AM

So I think I'm going to Sry Hop this beer. Any thoughts?

BarleyWater · 10-25-2008, 04:25 AM

Quote:

Originally Posted by ChefBrew

So I think I'm going to Sry Hop this beer. Any thoughts?

I dry hopped my last beer with the 0 minute addition (also known as a flame out or whirlpool addition, sometimes added with the use of a hopback) I forgot about. It will give you a slightly "greener" flavor, but will contribute basically the same thing to the beer.

Hagen · 10-25-2008, 04:27 AM

Quote:

Originally Posted by Grinder12000

Also you will come across "dry hopping" and then "hopback".

I
ve never done anything with dry hopping but this is where you add the hops AFTER you have carboyed it and I BELIEVE after fermentation (someone will correct me if I'm wrong).

Hopbacking is where you more or less siphon your wort over leaf hops and that wort goes into another vessle.

If I'm reading you correctly, you're confusing a hop back with first wort hopping...

A hop back is simply the container you put your hops in when either dry hopping or first wort hopping.

First wort hopping is when you either add hops to , or run your lautered wort through hops, on the way to the kettlebefore the boil.

BarleyWater · 10-25-2008, 04:40 AM

Quote:

Originally Posted by Hagen

If I'm reading you correctly, you're confusing a hop back with first wort hopping...

A hop back is simply the container you put your hops in when either dry hopping or first wort hopping.

First wort hopping is when you either add hops to , or run your lautered wort through hops, on the way to the kettlebefore the boil.

It's actually the container used when running your wort from the kettle to the fermenter. It is usually attached to the spigot, and allows the hot wort to flow through a container of hops before intering a counter flow, or plate style wort chiller.

dontman · 10-25-2008, 04:41 AM

Quote:

Originally Posted by ChefBrew

So my next batch of beer is a trappist ale. This is a big step I think. The question I have is that there are two hop additions: one at the beggining, or 60 min., and one at 0 min. What can "zero" mean? What do I do?

I have a question about this recipe. My experience with trappist ales is that they tend to be aged quite a bit before consumption which seems to make late addition hops or dry hopping kind of ineffective. Am I wrong here?

ChefBrew · 10-25-2008, 04:42 AM

Good question. This is what I 'm trying to figure out. Any help?

BarleyWater · 10-25-2008, 04:47 AM

Quote:

Originally Posted by dontman

I have a question about this recipe. My experience with trappist ales is that they tend to be aged quite a bit before consumption which seems to make late addition hops or dry hopping kind of ineffective. Am I wrong here?

I've never aged a beer long enough to make all the hop flavor and aroma drop out. Ot may be because I drink my beers pretty quickly, but I think it would take quite a while before the additions were made ineffective.