Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > scratches in better bottles
Reply
 
LinkBack Thread Tools
Old 12-06-2006, 10:04 PM   #1
PaleAleMale
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2006
Posts: 17
Default scratches in better bottles

I cleaned out my 6.5 gal better bottle w/ a bent wire brush and noticed that around the neck there were numerous scracthes...is this gonna be a problem?

thanks

PAM

__________________
PaleAleMale is offline
 
Reply With Quote Quick reply to this message
Old 12-06-2006, 10:30 PM   #2
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Orfy's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cheshire, England
Posts: 11,853
Liked 69 Times on 52 Posts
Likes Given: 30

Default

Just pay special attention to sterilisation and cleaning.

Orfy is offline
 
Reply With Quote Quick reply to this message
Old 12-06-2006, 10:47 PM   #3
johnsma22
Feedback Score: 0 reviews
 
johnsma22's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Taunton, MA
Posts: 1,892
Liked 32 Times on 26 Posts

Default

Here are some remarks from Better-Bottle's website with regard to washing them, and how brushes should never be used.

Washing

Hot water and the right detergents do an excellent job without scrubbing. Never use stiff brushes, abrasive scouring pads, or cleansers.

Detergents recommended for winemaking and beer brewing do not damage Better-Bottle carboys and related components when used according to the manufacturer's instructions (See Detergents below). It is rarely necessary to remove a Racking Outlet from a carboy in order to clean it. Patiently soaking a carboy in a solution of low-suds detergent and hot water is an easy and effective way to loosen stubborn contamination, which can then be rinsed out. For faster results, put a few cups hot wash solution into a carboy, add a face cloth, and vigorously slosh the solution and cloth. Better-Bottle carboys are light, so sloshing the carboy in your hands will not be difficult; however, rocking the carboy back and forth on its side or rocking it on a tennis ball placed under its punt requires even less effort. At each stage of washing a carboy fitted with a Carboy Adapter and High-Flow valve, the valve should be opened to allow some of the solution in the carboy to run into and though the valve.


Cleaning Up

Better-Bottle carboys are more easily washed and sanitized than glass carboys, because Better-Bottle carboys are so light weight and the surface of the special PET from which they are made is non-porous and hydrophobic. Hot water, a good bottle cleaning detergent, and some soaking will separate solids and films from the walls of Better-Bottle carboys without the need for brushing. Better-Bottle is not aware of any home winemaking and beer brewing detergents or sanitizers that damage Better-Bottle carboys and fittings, when used according to their manufacturer's instructions.
Stiff brushes, abrasive scouring pads, and cleansers should never be required, or used.

__________________
johnsma22 is offline
 
Reply With Quote Quick reply to this message
Old 12-07-2006, 01:49 AM   #4
KopyKat
Feedback Score: 0 reviews
 
KopyKat's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Round Rock Texas
Posts: 471
Liked 2 Times on 1 Posts

Default

I have been using Better Bottles for quite some time now and have never had to brush them out. For real grunge I put an ounce or two of clorox and fill with cold water in the bathtub overnight and empty. On rare ocassions I have had to put a stopper over the end and slosh the last gallon a few times to get off the last of it but never more than that.
I used to use PBW and got the same results but clorox is much cheaper and if you rinse with fresh water and air dry the results are the same.

__________________
Jerry Pritchett
KopyKat Brewery


Primary: Belgian Blonde (for cask)
Drinking: Robust Porter
Up Next: Christmas Ale, SNPA, Simcoe IPA

AustinZealots.com
Home of the Austin Zealot's Inquisition
KopyKat is offline
 
Reply With Quote Quick reply to this message
Old 12-10-2006, 02:30 PM   #5
JasonCajda
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2006
Location: Woodridge IL
Posts: 21
Default

You should never use a brush on the better bottles, use something like PPW let sit for 24 hrs then pour and rinse.

I'm not sure I would use the bottles with scratches in them.

__________________
JasonCajda is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Scratches in bucket ks_medic Beginners Beer Brewing Forum 19 09-11-2009 03:49 AM
Scratches in plastic MLT Snafu Equipment/Sanitation 2 04-17-2009 01:54 PM
Scratches KaseySeim Bottling/Kegging 1 02-20-2009 08:48 AM
Scratches in fermenter Blackhawkbrew Equipment/Sanitation 10 02-10-2009 07:56 PM
Brew Kettle with scratches shertz Equipment/Sanitation 3 08-06-2008 02:50 PM