Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Quick Bottling Question - Should they cool first?
Reply
 
LinkBack Thread Tools
Old 10-10-2008, 03:56 AM   #1
newbbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Posts: 18
Default Quick Bottling Question - Should they cool first?

I'm bottling my first brew this weekend, or think I will. Still have to check with the hydrometer, but it's been in secondary 2 weeks so I think I'll be good.

Anyway ...

I've washed the bottles and plan on running them through the dishwasher (with no detergent) and the "plate heat" setting to sterilize them. Then, bottling bucket on dishwasher and bottles in washer, sounds pretty handy and mess free.

My question though, and I've searched the forum (using the handy search feature) and could not find an answer, should I let the bottles cool prior to filling them with beer? My fear is taking them right from the washer, all nice and hot, and then adding beer will negatively affect the beer. If I do need to let the bottles cool first, will they be okay cooling in the washer for an hour or so?

Thanks in advance!

- the newb

__________________
newbbrewer is offline
 
Reply With Quote Quick reply to this message
Old 10-10-2008, 04:05 AM   #2
Malticulous
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: St. George Utah
Posts: 4,137
Liked 56 Times on 47 Posts
Likes Given: 74

Default

Too hot may upset the yeast.

__________________
Malticulous is offline
 
Reply With Quote Quick reply to this message
Old 10-10-2008, 04:20 AM   #3
scinerd3000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Milton, De
Posts: 2,155
Liked 10 Times on 10 Posts
Likes Given: 29

Default

dont forget to sanatize the caps. You probably fine leaving them sitting in the dishwasher until they cool off although keep in mind thats going to insulate the heat. Let them sit for a few hours and then bottle and your good.

When i sanitize i fill my bottling bucket with the same amount of water+sanitizer equal to the amount im about to bottle. That way i know how many bottles its going to take.

__________________
On Hiatus: Brewing at work....
scinerd3000 is offline
 
Reply With Quote Quick reply to this message
Old 10-10-2008, 02:12 PM   #4
DutchK9
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Springfield, Illinois
Posts: 369
Liked 1 Times on 1 Posts

Default

You can put your bottles in a dishwasher without soap and set to a hot setting for sterilization, but I really don't think every bottle will get washed out well and sanitized with the small opening of the mouth that has a dishwasher racks prong in it. You are better off getting some Star San or Idophor, and filling your sink up and then dunking the bottles in the sink. They don't need to be rinsed after wards, which makes it an easy process. The caps can be dipped in it also.

__________________
Up Next
Selection Premium-Chablis, Selection Premium-Pettite Sirah, Selection Premium-Ruisseaublanc
Primary
Guinnesss Extra Stout Clone
Secondary
Bottled & Kegged
Guinnesss Extra Stout Clone, Bass Ale Clone, Midwest English Bitter, Muntons Nut Brown Ale, Coopers Pilsener, Northern Bock, Apfelwein, Select Premium-Merlot, Select Premium-Borolo, Select Premium-Valpolicella, Northern Nut Brown Ale
Gone
Midwest Sierra Nevada Pale Ale, Midwest Hanks Hefeweizen
DutchK9 is offline
 
Reply With Quote Quick reply to this message
Old 10-10-2008, 02:28 PM   #5
menschmaschine
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Delaware
Posts: 3,278
Liked 34 Times on 28 Posts

Default

As long as you're not using the dishwasher to "clean" them (i.e., just for sanitization), you should be fine. Many of us on here (that still bottle) use the dishwasher for sanitization on a high heat setting, myself included, and never had an infection.

As for cooling the bottles, as long as they're not piping hot when filling, you should be OK. I'd let them cool for a bit before filling, but they don't necessarily have to be the same temp as the beer. Personally, I do 10-12 gallon batches, so I use the dishwasher twice for sanitizing bottles for each batch. And there is usually considerable time that passes between the dishwasher finishing and bottling. I "cap" each bottle with a small piece of aluminum foil as I remove them from the dishwasher. That way I don't have to worry about cooling or maintaining sanitization before bottling.

__________________

END TRANSMISSION

menschmaschine is offline
 
Reply With Quote Quick reply to this message
Old 10-10-2008, 02:59 PM   #6
ThickHead
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Atlanta, GA
Posts: 1,010
Liked 45 Times on 30 Posts
Likes Given: 9

Default

I dont see how it would hurt much. I mean, if the bottles are cool enough for you to handle then they shouldnt hurt anything. Always better to be safe than sorry in these cases though in my opinion. I try never to increase my potential for error though, if I can help it. Personally I fill a bucket with a sanitizer solution, dunk the bottles for 2min, then hang dry them on a bottle tree.

__________________
ThickHead is offline
 
Reply With Quote Quick reply to this message
Old 10-10-2008, 03:48 PM   #7
mmb
FNG
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
mmb's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Mid-Michigan
Posts: 24,807
Liked 3188 Times on 3091 Posts
Likes Given: 179

Default

Let them cool to the point you feel comfortable holding them and you'll be fine. Beer is pretty resilient stuff.

Now, on the other hand, if you need welding gloves to hold the bottles....

__________________
White Dog Aleworks and Drafthouse
mmb is online now
 
Reply With Quote Quick reply to this message
Old 10-11-2008, 12:36 AM   #8
newbbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Posts: 18
Default

Thanks for the advice everyone!

Just to update, after washing all the bottles and running them through the dishwasher, they came out warm to the touch, but not hot. Seems all my worrying was for nothing.

Course, I then took a gravity reading and found after 2 weeks in secondary my hefe is only at 1.014, so no bottling this weekend!

__________________
newbbrewer is offline
 
Reply With Quote Quick reply to this message
Old 10-11-2008, 03:29 AM   #9
Malticulous
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: St. George Utah
Posts: 4,137
Liked 56 Times on 47 Posts
Likes Given: 74

Default

If it's 1.014 tomorrow bottle.

__________________
Malticulous is offline
 
Reply With Quote Quick reply to this message
Old 10-12-2008, 05:19 PM   #10
newbbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Posts: 18
Default

I just measured and it was still 1.014. It was at that point I realized I had forgotten to write down the OG. Hey, it's my first batch. I'm learning from my mistakes!

I found some sites that talked about estimating the OG, and with my 8lbs Alexander Sun Country Wheat Malt Extract that I used, that means about a 1.058. Which means I'm looking at a FG of 1.014, which is where I'm at. I used a slap pack of Wyeast 3068 and the batch was in primary 1 week and then secondary 2 weeks.

I think I'm good to go for bottling, but I'm really paranoid about bottle bombs so wanted to post and see if anyone thinks bottling now would be really, really bad.

Thanks!

__________________
newbbrewer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick question about after bottling. Jmart Beginners Beer Brewing Forum 4 09-21-2009 01:26 AM
quick question before bottling shady oaks Beginners Beer Brewing Forum 5 03-18-2009 06:44 PM
Quick Bottling Question???? limey lou Bottling/Kegging 3 03-31-2008 08:21 PM
Quick bottling question.. mhdfj2 Bottling/Kegging 2 03-19-2008 04:11 AM
Quick question re: bottling Madtown Brew General Techniques 16 07-11-2007 11:00 PM



Newest Threads

LATEST SPONSOR DEALS