The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Question about OG levels on Brewer's Best Weizenbier kit.

Reply
 
LinkBack Thread Tools
Old 09-22-2012, 06:27 AM   #1
cullenhoglund
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: fargo, nd
Posts: 1
Default Question about OG levels on Brewer's Best Weizenbier kit.

**(This is my first post and I apologize for the length, I just wanted to try to include all necessary information to make answering my question as easy as possible.)

Hello, I just finished brewing my first batch. I chose to start with the Brewers Best "Weizenbier" kit. The kit estimates that the OG should be in the 1.047-1.051 range. The FG should be within 1.011-1.015 range. The ABV should be 4.5-4.75%.

I followed the instructions included in the kit and the recommendations from the book "Home Beermaking" by William Moore very closely. I used an auto siphon to siphon the roughly 2.5 gallons of wort from my kettle to the fermentation bucket. I then added water to bring the wort up to 5 gallons.

I took two gravity level readings with my hydrometer before and after thoroughly stirring and shaking the brew. Both readings were at 1.041, (I am confident that these readings were correct) so about .006 lower than the low end of the estimated range of OG.

I do not wish to alter the wort at this time. My intention is to see this through as a learning experience. So finally, my question is:

Typically, if an OG reading is lower than expected what effect does this have on the FG? Will this most likely cause a lower FG reading or a higher one?

It is my understanding that if the OG is lower than the estimated range, (such as 1.041 in this case vs. the estimated 1.047-1.051) and the FG is ALSO lower, (such as 1.005 vs. the estimated 1.011-1.015) the ABV (approximately 4.73%) should still remain within the intended range (4.5-4.75%).

Conversely, if the FG falls ABOVE the estimated range (for example 1.021 vs. 1.011-1.015) the resulting ABV (approximately 2.63%) would be significantly lower than the intended range.

Which of these scenarios, if either, is more likely?

Thank you in advance for taking the time to respond to these questions. I look forward to some helpful suggestions.

__________________
cullenhoglund is offline
 
Reply With Quote Quick reply to this message
Old 09-22-2012, 07:12 PM   #2
Wayneh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 101
Liked 2 Times on 2 Posts

Default

What was the temp. Could have been really hot wort when you took the reading. If not your close enough. Maybe the final reading will be a little lower then your all set.

__________________

Wayne

Wayneh is offline
 
Reply With Quote Quick reply to this message
Old 09-22-2012, 07:17 PM   #3
Wayneh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 101
Liked 2 Times on 2 Posts

Default

The reading will only make the alcohol % lower. Everything will be fine. It will bubble away like crazy and have a good tasting beer.

__________________

Wayne

Wayneh is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
A question about lower than planned beer levels when transferring to secondary DerCribben Beginners Beer Brewing Forum 0 08-02-2012 11:32 PM
Brewer's Best IPA Kit question billysparrows Beginners Beer Brewing Forum 14 12-03-2011 08:37 AM
How long for krausen to fall? (Brewer's Best Weizenbier kit) Jimmies Beginners Beer Brewing Forum 6 12-30-2009 08:49 PM
*Really* high OG using Brewer's Best Weizenbier kit Jimmies Beginners Beer Brewing Forum 19 12-10-2009 05:56 PM
weizenbier brewer's best kit and kraeusen amount? sillyburt Beginners Beer Brewing Forum 5 11-21-2009 01:11 AM