Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Beginners Beer Brewing Forum (http://www.homebrewtalk.com/f39/)
-   -   Priming sugar in force carbonated kegs (http://www.homebrewtalk.com/f39/priming-sugar-force-carbonated-kegs-307047/)

Agdarnell 02-23-2012 05:33 AM

Priming sugar in force carbonated kegs
 
Ok so my girlfriend got me two kegs and all the goodies to go along with it for my birthday and they just came in today! So I have known about this comming and I waited to bottle and am planning on kegging my sierra nevada pale ale tomorrow! My question is I am planning to force carbonate (I know its not recomended but for the first batch in the keg I am really impatient!) and I was wondering if I should use any carbonating sugar if I am planning on force carbonating?? Any help would be awesome! Brew on!!!:mug:

baddad 02-23-2012 05:35 AM

No , if you are using co2 ,just set your pressure ,and wait a week .

Agdarnell 02-23-2012 05:42 AM

And what pressure do yall recommend? From what I have read put it to 30psi and then bring it back down to 11psi when you are ready to dispense? Is this correct? I almost feel I am to new to brewing to start kegging (I have 5 batches under my belt but 4 are still in the works I have only actually tried 1) but at the same time I am super excited and no matter what happens I will continue to brew and try and get better!

ETCS 02-23-2012 09:05 AM

Here is my process. After beer is cold crashed in the keg, I set CO2 to 30 lbs for 24 hours and then vent the keg and reduce pressure to 12 - 15 lbs and let it for a week. After a week, I pour a glass and go from there.

slogger 02-23-2012 11:10 AM

I've bled the O2 out and force carbed my kegs at 30 psi for 24 hours and gently agitated them to get the CO2 into solution. it definately works if you are anxious to drink your beer, but i have found it's worth the wait to set at 11 psi for a week and let it age a little longer. I feel that its worth the wait! astes much better and FWIW I've overcarbonated when force carbing at 30 psi. That is no good - takes about five minutes to pour a pint - too much foam.


All times are GMT. The time now is 05:46 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.