Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Off flavors - Sanitation and/or Temperature?
Reply
 
LinkBack Thread Tools
Old 01-03-2013, 03:45 AM   #1
binarybison
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 6
Liked 1 Times on 1 Posts

Default Off flavors - Sanitation and/or Temperature?

I'm new to brewing, I've done two batches, an amber and an IPA, both from brewers best. I've noticed similar off flavors in both batches, and I want to figure out what I need to do better for the next batch.

The first batch was an amber, and it had a little bit of a weird aftertaste that is hard to describe. Interestingly, this aftertaste seems to have intensified over time (it has now been almost 3 months since bottling) to the point where I am questioning whether the rest is worth drinking. I may keep it around for awhile since I understand time often helps, but I'm not very hopeful.

Notes from my brew day that might be important:
1) As it was my first brew, I didn't realize how much ice I needed to cool the wort, so the cooling process took about an hour using a cold water bath as opposed to an ice water bath.
2) I didn't stir the wort and the water I topped off with before pitching the yeast.
3) According to my thermostat, the house was 72F.

My next batch was an IPA that just finished bottle conditioning, so maybe more time will help it. However, it has a bit of a similar aftertaste to the amber, as well as a hint of soapiness.

Notes from brew day:
1) After stirring the wort, I somehow forgot to pitch the yeast, and only remembered about 6 hours later...
2) I left the beer in primary fermentation for about 10-12 weeks.
3) The temperature in my house during active fermentation was 72F, but probably fluctuated between 65 and 72F during the rest of the time.

Other notes regarding sanitation that might be important.
1) I fermented in old 6 gallon buckets that used to store grain (to be ground into flour, not used in brewing). I soaked the buckets in oxyclean free, and then sanitized with starsan before use.
2) Since I observed that oxiclean can be used to both clean fermentors as well as remove labels, I thought I'd kill two birds with one stone and remove labels from some bottles while cleaning. I used the same oxyclean solution in the fermentation bucket for a few days while I cycled some bottles with labels through to get the labels off. I did not visually observe any ill effects from this process, but I wonder if it contributed to the soapy flavor in the IPA.

So while I confess to making a few mistakes, some googling (most often landing on HBT) suggests that they may not be show stoppers. I've also read that extract beers have a certain twang to them, and I'm wondering if the off flavors I am experiencing are my fault (likely) or the extract.

What do I need to do for the next batch to ensure that I'm not getting these off flavors? Are my problems likely coming from poor sanitation and/or temperature control, which I gather are the two most likely contenders?

__________________
binarybison is offline
 
Reply With Quote Quick reply to this message
Old 01-03-2013, 04:22 AM   #2
HopLife
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Eugene, OR
Posts: 282
Liked 11 Times on 11 Posts
Likes Given: 16

Default

I am not sure which off flavor you have. I would find a way to monitor the actual temp of the wort while fermenting, the easiest solution are the stick on thermometers from fermometer. You should be fermenting an IPA around 65 to 70 ideally. Keep in mind that the yeast will create some extra heat in the wort. Fermenting in a house at 72 may mean fermentations as high as 75 to 78. Also, be sure to really rinse out the oxiclean so there is no residual then use the starsan.

Beyond that, you may have less off flavors develop if you have a stonger fermentation. Look into a method to aerate the wort when pitching yeast. You may look into making a 'yeast starter.' And finally do not rush the process. If you follow the minimum time guidelines for a recipe you will generally not give your yeast enough time to clean up other compounds left residual in the beer after the bulk of noticeable fermentation.

Lastly, be sure not to add any oxygen to the finished beer during the bottling process as you will create oxidation of beer flavors. This tendency with poor fermentations and a poor quality extract or old extract can be a pretty gnarly twangy concoction. If it isn't one of these issues then we may have to look at the recipes.

__________________

meh.

HopLife is offline
 
Reply With Quote Quick reply to this message
Old 01-03-2013, 04:25 AM   #3
ilikeguns
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: , NY
Posts: 257
Liked 19 Times on 17 Posts
Likes Given: 5

Default

1. Get your fermentation temps under control.. even if the ambient temp is 72, the temperature inside your bucket could be much higher. I've heard up to 10 degrees but most likely just a few degrees.

2. Pitch sooner than later. The longer you wait, the more chance for bad stuff to get in. You may be fine, but.. you are risking it.

3. I don't think the long time in the primary is affecting you that much but what are you waiting for?

4. Plastic buckets can get scuffs/scrapes that can harbor bacteria etc and there may be residues from the labels, but I dont think it's a big deal. Make sure you rinse thoroughly and properly sanitize.

__________________

life is too short to drink beer you don't love...

ilikeguns is offline
 
Reply With Quote Quick reply to this message
Old 01-03-2013, 06:46 AM   #4
CiscoKid
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
CiscoKid's Avatar
Recipes 
 
Join Date: Dec 2008
Location: Cleveland, OH
Posts: 265
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by binarybison View Post
I'm new to brewing, I've done two batches, an amber and an IPA, both from brewers best. I've noticed similar off flavors in both batches, and I want to figure out what I need to do better for the next batch.

The first batch was an amber, and it had a little bit of a weird aftertaste that is hard to describe. Interestingly, this aftertaste seems to have intensified over time (it has now been almost 3 months since bottling) to the point where I am questioning whether the rest is worth drinking. I may keep it around for awhile since I understand time often helps, but I'm not very hopeful.
From my experience, I tend to attribute off flavors that intensify over time to some sort of infection. Check your process, cleanliness is next to godliness.


Quote:
Originally Posted by binarybison View Post
2) I left the beer in primary fermentation for about 10-12 weeks.
3) The temperature in my house during active fermentation was 72F, but probably fluctuated between 65 and 72F during the rest of the time.
2) That's a long time sitting on top of the dead yeast at the bottom of the primary. Unless I'm doing something like dry hopping or playing with fruit I don't secondary my beers. But I don't leave them in the primary more than a month, either. Once the yeast cells die, their enzymes have nothing to do and start to break down the cell walls until they rupture - a process known as autolysis. This will lead to off flavors in your beer. There has been a lot of debate in the past on these forums over how long is too long. Personally, I stick to a month - but that's just me.

3) My wife hates the first week after I brew, because I turn the thermostat down to 66 and close the heat vent in the laundry room in the basement.

Quote:
Originally Posted by binarybison View Post
Other notes regarding sanitation that might be important.
1) I fermented in old 6 gallon buckets that used to store grain (to be ground into flour, not used in brewing). I soaked the buckets in oxyclean free, and then sanitized with starsan before use.
2) Since I observed that oxiclean can be used to both clean fermentors as well as remove labels, I thought I'd kill two birds with one stone and remove labels from some bottles while cleaning. I used the same oxyclean solution in the fermentation bucket for a few days while I cycled some bottles with labels through to get the labels off. I did not visually observe any ill effects from this process, but I wonder if it contributed to the soapy flavor in the IPA.
Spend the couple of dollars for a new, food grade plastic bucket. I ferment in them and I replace them every year. It's incredibly easy to make microscopic scratches on the inside of plastic buckets - lots of nooks and crannies for little beer-loving bacterium to hideout and wait to soak in your soon-to-be beery goodness. You'll save yourself some head scratching down the road when things don't quite work out. Same thing with hoses.

As for the soapy flavors, that ties back to the long primary time. John Palmer described this succinctly in How to Brew: "If you leave the beer in the primary fermentor for a relatively long period of time after primary fermentation is over... soapy flavors can result from the breakdown of fatty acids in the trub. Soap is, by definition, the salt of a fatty acid; so you are literally tasting soap."
__________________
Quote:
Originally Posted by llazy_llama View Post
If you drink enough of it, it should come out very clear with just a tad bit of yellowish color.
CiscoKid is offline
 
Reply With Quote Quick reply to this message
Old 01-03-2013, 01:05 PM   #5
WoodlandBrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
WoodlandBrew's Avatar
Recipes 
 
Join Date: Oct 2012
Location: Malden, MA
Posts: 1,862
Liked 140 Times on 136 Posts
Likes Given: 59

Default

A water bath, or swamp cooler is a great way to regulate temperature. In the winter I use an aquarium heater:
http://woodlandbrew.blogspot.com/201...e-control.html

And in the summer ice keeps the temperature in check:
http://woodlandbrew.blogspot.com/201...mp-cooler.html

__________________

The 2nd edition is now available: Brewing Engineering
Woodland Brewing Research Blog Applied Science for Better Beer.

WoodlandBrew is offline
 
Reply With Quote Quick reply to this message
Old 01-04-2013, 02:37 AM   #6
binarybison
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 6
Liked 1 Times on 1 Posts

Default

Alright, I'm gonna grab a new better bottle, make sure to carefully clean it, keep the temperature down, and try not to do anything stupid. Hopefully the next batch turns out better! Thanks for the help!

__________________
binarybison is offline
HopLife Likes This 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Beer Flavors / Off flavors brewer1982 General Beer Discussion 5 11-09-2012 11:47 PM
Will too LOW of a temperature cause off flavors? GreenDragon Beginners Beer Brewing Forum 14 03-03-2012 03:49 PM
DIY oak essence, water soluble flavors vs alcohol soluble flavors Nateo Brew Science 2 08-30-2011 08:08 PM
Johnson Analog Temperature Controller Temperature Profile Coastarine Equipment/Sanitation 4 10-11-2010 04:58 PM
What temperature do I need to get my wort cooled to so I can avoid off flavors? ratm4484 Beginners Beer Brewing Forum 10 07-03-2007 11:59 PM



Newest Threads

LATEST SPONSOR DEALS